Up- 6118 Thermal Shock Test Chamber

Introducation:

Thermal shock test chambers are professional environmental testers that verify products’ tolerance to sharp extreme temperature shifts.

They rapidly move samples between independent hot and cold zones within seconds to simulate real thermal stress. The hot zone spans +50°C to over +200°C, and the cold zone reaches -65°C.

Two designs are offered: two-zone models use a moving basket to transfer samples; three-zone types switch hot/cold air to a central test area via dampers.

Fast temperature cycling causes thermal expansion and contraction, revealing defects like cracks, delamination and seal leakage.

Standards Compliance：

GB/T 2423.22, GB/T 10592, GB/T 2423.1/2.

GJB 150.5A-2009, GJB 150.3.

IEC 60068-2-14, IEC 60068-3-5.

Semiconductor: JEDEC 190A.

Automotive: ISO 16750-4.

Military/Aerospace: MIL-STD-810G, MIL-STD-883H.

Send email to us

Product Detail

SERVICE AND FAQ:

Product Tags

Features:

Ultra-fast thermal shock: Transition time ≤10s (2-zone) / ≤30s (3-zone) between hot and cold chambers.

Wide temperature range: Standard -65℃～+150℃; optional -40℃/-55℃ low and +125℃/+200℃ high.

High precision control: Fluctuation ≤±0.5℃, uniformity ≤±2.0℃ for repeatable results.

Independent chamber design: Separate hot/cold/test zones; sample stationary (3-zone) or shuttle (2-zone).

Fast recovery: Recovery time ≤3 minutes to shorten test cycles.

Programmable controller: Touchscreen PLC with multi-cycle, dwell time, auto-run and data logging.

Comprehensive safety: Over-temperature, compressor, fan, overload, phase loss and power-off protection.

Premium materials: SUS304 inner chamber, coated steel outer cabinet, corrosion-resistant and easy to clean.

Specifications:

Parameter	Standard	Optional
Temp. Range	-65℃ ～ +150℃	-40℃～+125℃ / -55℃～+150℃
Hot Chamber	+60℃ ～ +200℃	+80℃～+250℃
Cold Chamber	-70℃ ～ 0℃	-80℃～0℃（customizable - 100℃）
Transition Time	2-zone≤10s；3-zone≤30s	2-zone≤5s；3-zone≤15s
Recovery Time	≤3 min	≤2 min
Fluctuation	≤±0.5℃	≤±0.1℃（high-end）
Uniformity	≤±2.0℃	≤±1.0℃
Inner Chamber	40×50×40 cm（W×H×D）	50×60×50 cm / customized size
Load Capacity	10 kg	20 kg / 30 kg
Power Supply	AC380V 50/60Hz 15kW	220V / customized voltage
Structure	2-zone or 3-zone	Customized structure

Applications：

Electronics & Semiconductor: PCB, IC, chips, connectors, sensors for thermal stress and crack detection.

Automotive: In-vehicle electronics, lamps, plastic parts, batteries, wiring harnesses for temperature cycling and reliability.

Aerospace: Precision instruments, avionics, composites, military components under extreme thermal shock.

New Energy: Li-ion batteries, BMS, PV modules, energy storage devices for thermal shock and safety assessment.

Metals & Plastics: Metal/plastic/rubber materials for thermal expansion, interfacial cracking, seal failure tests.

R&D & QC: Laboratory research, quality control, third-party testing for standard environmental tests.

Previous: IP5X IP6X Dustproof Testing Machine Comply With IEC 60529

Next: Up-6124 High Accelerated Temperature And Humidity Stress Test Chamber

Our service:

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.

2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.

3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.

4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.

FAQ:

1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.

Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.

2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.

3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.

4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.

Hot and cold Impact chamber