UP- 6118 Rūma Whakamātautau Ru Wera

Kupu Whakataki:

He whakamātautau taiao ngaio ngā rūma whakamātautau ru wera e manatoko ana i te ātete o ngā hua ki ngā huringa pāmahana tino koi.

Ka tere te neke i ngā tauira i waenga i ngā rohe wera me ngā rohe makariri motuhake i roto i ngā hēkona hei whakatauira i te ahotea wera tūturu. Ka horapa te rohe wera mai i te +50°C ki te neke atu i te +200°C, ā, ka eke te rohe makariri ki te -65°C.

E rua ngā hoahoa e tukuna ana: ko ngā tauira rohe-rua e whakamahi ana i tētahi kete neke hei whakawhiti tauira; ko ngā momo rohe-toru ka whakawhiti i te hau wera/matao ki tētahi wāhi whakamātautau pokapū mā roto i ngā ārai hau.

Ka puta te horapa me te whakahekenga o te pāmahana i te huringa tere o te pāmahana, ka kitea ngā hapa pēnei i te kapiti, te wehewehe me te turuturu o te hiri.

Te Whakatutukitanga Paerewa：

GB/T 2423.22, GB/T 10592, GB/T 2423.1/2.

GJB 150.5A-2009, GJB 150.3.

IEC 60068-2-14, IEC 60068-3-5.

Kaitātari Āhua: JEDEC 190A.

Aunoa: ISO 16750-4.

Ope Taua/Rererangi: MIL-STD-810G, MIL-STD-883H.

Tukua mai he īmēra ki a mātou

Taipitopito Hua

RATONGA ME NGĀ PĀTAI UIRA:

Ngā Tohu Hua

Ngā Āhuatanga:

Te ru wera tino tere:Te wā whakawhiti ≤10s (rohe-2) / ≤30s (rohe-3) i waenga i ngā rūma wera me ngā rūma makariri.

Awhe pāmahana whānui:Paerewa -65℃～+150℃; kōwhiringa -40℃/-55℃ iti me te +125℃/+200℃ teitei.

Mana whakahaere tino tika:Te piki me te heke ≤±0.5℃, te ōritetanga ≤±2.0℃ mō ngā hua ka taea te whakahoki.

Te hoahoa rūma motuhake:Wehea ngā rohe wera/makariri/whakamātautau; tauira pūmau (rohe-3) te waka rererangi rānei (rohe-2).

Te whakaora tere:Te wā whakaora ≤3 meneti hei whakapoto i ngā huringa whakamātautau.

Kaiwhakahaere hōtaka:PLC mata-pā me te huringa maha, te wā noho, te whakahaere-aunoa me te takiuru raraunga.

Haumarutanga whānui:Te pāmahana nui, te pēhi pēhi, te pā hau, te taumaha rawa, te ngaronga ā-wāhanga me te tiaki i te whakaweto hiko.

Ngā rauemi kounga teitei:He rūma o roto SUS304, he kāpata o waho he maitai kua pania, he ātete ki te waikura, he ngāwari hoki ki te horoi.

Ngā Whakatakotoranga:

Tawhā	Paerewa	Kōwhiringa
Awhe Pāmahana	-65℃~+150℃	-40℃~+125℃ / -55℃~+150℃
Rūma Wera	+60℃~+200℃	+80℃~+250℃
Rūma Matao	-70℃~0℃	-80℃~0℃（whakaritenga - 100℃）
Wā Whakawhiti	Rohe-2≤10s；Rohe-3≤30s	Rohe-2≤5s；Rohe-3≤15s
Wā Whakaora	≤3 meneti	≤2 meneti
Te piki me te heke	≤±0.5℃	≤±0.1℃（kounga teitei）
Te ōritetanga	≤±2.0℃	≤±1.0℃
Rūma o Roto	40×50×40 henemita（W×H×D）	50×60×50 cm / rahi kua whakaritea
Te kaha utaina	10 kirokaramu	20 kg / 30 kg
Pūtake Hiko	AC380V 50/60Hz 15kW	220V / ngaohiko whakarite
Hanganga	Rohe-2, rohe-3 rānei	Hanganga ritenga

Ngā tono：

Ngā Hikohiko me te Ārahi-ā-Haumaru:PCB, IC, maramara, hononga, pūoko mō te ahotea wera me te kite kapiti.

Waka:Ngā hikohiko o roto i te waka, ngā rama, ngā wāhanga kirihou, ngā pākahiko, ngā taura waea hei whakaū i te huringa pāmahana me te pono.

Rererangi:Ngā taputapu tika, ngā waka rererangi, ngā mea hiato, ngā wāhanga hōia i raro i te ru wera nui.

Pūngao Hou:Ngā pākahiko Li-ion, BMS, kōwae PV, ngā taputapu rokiroki pūngao mō te aromatawai i te ru wera me te haumaru.

Ngā konganuku me ngā kirihou:Ngā rauemi whakarewa/kirihou/rapa mō te whakawhanuitanga wera, te pakaru o te atanga, ngā whakamātautau rahunga hiri.

R&D me te QC:Rangahau taiwhanga, whakahaere kounga, whakamātautau tuatoru mō ngā whakamātautau taiao paerewa.

O mua: Mīhini Whakamātautau Ārai Puehu IP5X IP6X e Whai ana ki te IEC 60529

Panuku: UP-6124 Rūma Whakamātautau Taumahatanga Pāmahana Tere me te Makuku Teitei

Tā mātou ratonga:

I roto i te tukanga pakihi katoa, ka tukuna e mātou he ratonga Hoko Tohutohu.

1) Te tukanga uiui a te kiritaki:I te matapaki i ngā whakaritenga whakamātautau me ngā taipitopito hangarau, ka tūtohu i ngā hua e tika ana ki te kiritaki hei whakaū. Kātahi ka whakahua i te utu e tika ana kia rite ki ngā hiahia o te kiritaki.

2) Ngā whakaritenga whakarite tukanga:Te tuhi i ngā tuhi e pā ana hei whakaū ki te kiritaki mō ngā whakaritenga ritenga. Tukuna he whakaahua tohutoro hei whakaatu i te āhua o te hua. Kātahi, whakaū i te otinga whakamutunga, me te whakaū i te utu whakamutunga ki te kiritaki.

3) Te tukanga whakaputa me te tuku:Ka hangaia e mātou ngā mīhini kia rite ki ngā whakaritenga PO kua whakamanahia. Ka tukuna atu he whakaahua hei whakaatu i te tukanga whakaputa. Kia oti te whakaputa, ka tukuna atu he whakaahua ki te kiritaki hei whakaū anō mā te mīhini. Kātahi ka whakatikatikahia e tō ake wheketere, e te tuatoru rānei (e ai ki ngā whakaritenga a te kiritaki). Tirohia me te whakamātautau i ngā taipitopito katoa, kātahi ka whakarite i te tākai. Tukuna ngā hua kua whakamanahia te wā tuku me te whakamōhio atu ki te kiritaki.

4) Tāutanga me te ratonga i muri i te hoko:E tautuhi ana i te tāutanga o aua hua ki te parae me te whakarato tautoko i muri i te hoko.

Ngā Pātai Auau:

1. He Kaihanga koe? Kei te tuku ratonga muri-hoko koe? Me pēhea taku tono atu mō tēnā? Ā, me pēhea te pūtāhui?Āe, ko mātou tētahi o ngā Kaihanga ngaio pērā i ngā Rūma Taiao, ngā taputapu whakamātautau hū hiako, ngā taputapu whakamātautau rapa kirihou… i Haina. Ko ia mīhini i hokona mai i tā mātou wheketere he 12 marama te whakamana i muri i te tuku. I te nuinga o te wā, ka tukuna e mātou he 12 marama mō te tiaki KOREUTU. Ahakoa e whakaarohia ana te kawe moana, ka taea e mātou te whakaroa i te 2 marama mō ā mātou kiritaki.

Hei tāpiri atu, ki te kore tō mīhini e mahi, ka taea e koe te tuku īmēra mai, te waea mai rānei ki a mātou. Ka whakapau kaha mātou ki te kimi i te raruraru mā te kōrerorero, mā te kōrerorero ataata rānei mēnā e tika ana. Kia whakaūtia te raruraru, ka tukuna te otinga i roto i ngā haora 24 ki te 48.

2. Ā, me pēhea te wā tuku?Mō tā mātou mīhini paerewa, arā, ko ngā mīhini noa, ki te mea he taonga kei roto i te whare putunga, e 3-7 ngā rā mahi; ki te kore he taonga, ko te tikanga, ko te wā tuku he 15-20 ngā rā mahi i muri i te whiwhinga o te utu; ki te mea kei te hiahia nui koe, ka whakaritea e mātou he whakaritenga motuhake māu.

3. E whakaaetia ana e koe ngā ratonga whakaritenga? Ka taea e au te tāpiri i taku waitohu ki te mīhini?Āe, koia rā. Ehara i te mea ko ngā mīhini paerewa anake ka taea e mātou te tuku engari ko ngā mīhini ritenga anō hoki kia rite ki ō hiahia. Ā, ka taea hoki e mātou te tāpiri i tō waitohu ki te mīhini, ko te tikanga ka tukuna e mātou he ratonga OEM me ODM.

4. Me pēhea taku tāuta me taku whakamahi i te mīhini?Kia oti i a koe te tono i ngā mīhini whakamātautau mai i a mātou, ka tukuna atu e mātou te pukapuka whakahaere, te ataata rānei i te putanga Ingarihi mā te Īmēra. Ko te nuinga o tā mātou mīhini ka tukuna me te wāhanga katoa, ko te tikanga kua tāuta kētia, me hono noa e koe te taura hiko ka tīmata ki te whakamahi.

Tuhia tō karere ki konei ka tuku mai ki a mātou