Products
UP-6195 Cold and Heat Shock Testing Machine
Application:
This series of cold and heat shock test box is suitable for alternating shock test of electrical and electronic products and electronic parts.
Standard:
Products can meet CNS, MIL, IEC, JIS, GB/T2423.5-1995, GJB150.5-87 and other standards
Control Mode:
Using low temperature and high temperature hot and cold storage tank, in accordance with the action to open the valve, the low temperature and high temperature to test by air supply system fast fast groove, so as to achieve rapid temperature shock effect,balance (BTC) + special temperature control system design of supply air circulation system, to control SSR P.I.D. way, make the system of heat equal to the amount of heat loss, thus the use of long-term stability.
Specifications:
| Temperature impact range | High temperature 60ºC~+150ºC Low temperature -40ºC~-10ºC |
| Preheating temperature range | +60ºC ~ +180ºC |
| High temperature tank heating time | RT(indoor temperature)~+180ºC takes about 40min (room temperature is +10 ~ +30ºC). |
| Pre-cooling temperature range | -10ºC~-55ºC |
| Cooling time of cryogenic tank | RT (room temperature) ~ -55ºC for about 50min (room temperature +10-- +30ºC) |
| Temperature fluctuation | ±1.0ºC |
| Temperature Uniformity | ±2.0ºC |
| Impact recovery time | -40-- +150ºC for 5min. The high and low temperature impact constant temperature time is above 30min |
Product Mix:
| Inside Dimension | W500×H400×D400 mm |
| Carton Size | W1230×H2250×D1700 mm |
| In the cases of material | Fogged stainless steel plate(SUS#304) |
| Carton material | Sand-lined stainless steel plate(SUS#304) |
| Heat preservation material | a. High temperature tank: aluminum silicate insulation cotton. b. Low temperature tank: HIGH density PU foam. |
| Door | Upper and lower monolithic doors, open on the left. a. Embedded flat handle. b.After the button:SUS#304. c.Silicone foam rubber strip. |
| Testing rack | a.The hanging basket size:W500 x D400mm b.No more than 5KG. c.Stainless steel SUS304 inner case.. |
| Heating system | Finned radiator type stainless steel heater. 1.High temperature tank 6 KW. 2.Cryostat 3.5 KW. |
| Air circulation system | 1.Motor 1HP×2 Platform. 2.Stainless steel extension shaft.. 3.Multi-wing fan blade(SIROCCO FAN). 4.Specially designed fan forced air circulation system. |
Our service:
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.
2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.
3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.
4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.
FAQ:
1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.
Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.
2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.
3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.
4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.
Write your message here and send it to us
