Hot and Cold Thermal Shock Test Chamber UP-6118

Model: UP-6118

Product Name: Hot and Cold Thermal Shock Test Chamber

Internal Size: W600 × H850 × D800 mm

Structure: Two-box type

Inner Material: SUS304 stainless steel

Power Supply: AC380V 50Hz, 3-phase 4-wire

Cooling Method: Water cooled

Compliant Standards: IEC 60068-2-14, GB/T 2424.13, GB/T 2423.22, GJB, MIL

Customization: Remote monitoring, LN2 quick cooling device available

Send email to us

Product Detail

SERVICE AND FAQ:

Product Tags

Product Introduction

The thermal shock test chamber rapidly switches between high and low temperature environments to evaluate samples’ physical performance, electrical characteristics and structural stability under drastic temperature fluctuations. It adopts two-box structure with independent high temperature zone, low temperature zone and static test zone, featuring fast conversion speed and short temperature recovery time.

Product Highlights

* Two-box design: separate high temperature zone, low temperature zone and static test zone

* Air channel switching shock mode for fast temperature conversion

* Touch color LCD controller, supports real-time test curve display

* High temperature accuracy with PID calculation control algorithm

* Imported dual reciprocating compressors, water cooling system for fast cooling

* Adjustable cycle times and defrosting cycles

* Complete multi-layer safety protection system

* Supports 24-hour continuous stable operation

Technical parameters

Size（mm）	600850800
Temp range	High greenhouse: cold ~ + 150 ℃ low greenhouse: cold ~ - 50 ℃
Temp Evwnness	±2℃
Temp conversion time	10S
Temp recovery time	3min
Material	Shell: SUS304 # stainless steel plate Liner: SUS304 # stainless steel plate
Refrigeration system	Dual reciprocating compressors refrigeration(water-cooled), imports France Taikang compressor group,environmentally friendly refrigerant
Control system	Korea imported programmable temperature controller
Temp sensor	PT 100 *3
Setting range	TEMPERATURE : -70.00+200.00℃
Resolution	TEMPERATURE : 0.01℃ / TIME : 1 MIN
Output type	PID + PWM + SSR Control mode
Simulation load (IC)	4.5kg
Cooling system	Water cooled
Meet the standard	Products to satisfy GB, GJB, IEC, MIL, corresponding test standard test method
Power	AC380V/50HZThree-phase four-wire AC power
Expansion characteristics	Diffuser and return air palate know device detector control/CM BUS (RS - 485) remote monitoring management system/Ln2 liquid nitrogen quick cooling control device

It is widely used for reliability assessment and quality verification in electronics, automotive, military, metal, plastic and material industries.

Product Application

It is widely used for reliability assessment and quality verification in electronics, automotive, military, metal, plastic and material industries.

Test Standards

Compliant with IEC 60068-2-14, GB/T 2424.13, GB/T 2423.22, GJB, MIL, EIA 364-32

FAQ

Q: What is the working principle of this two-zone thermal shock chamber?

A: It switches high/low temperature airflow into the static test area via air duct to realize rapid thermal shock test.

Q: Can this chamber run continuously for long hours?

A: Yes, it supports 24-hour continuous testing with comprehensive safety protection.

Q: What is the max sample load for UP-6118?

A: The maximum simulation load is 4.5 kg, customized larger load is acceptable.

Q: Does this model support remote monitoring function?

A: RS485 remote monitoring interface is available as an optional upgrade.

Q: Can I set automatic defrosting and repeated shock cycles?

A: Yes, shock cycles and defrosting times can be freely programmed on the touch controller.

Contact Us

Previous: Thermal Burn-In Aging Chamber for Electronics UP-6196

Next: High-Responsiveness Two-Zone Thermal Shock Test Chamber UP-6118

Our service:

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.

2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.

3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.

4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.

FAQ:

1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.

Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.

2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.

3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.

4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.

Cold Hot Impact Thermal Shock Test Chamber