Products
UP-6118 Programmable Touch Screen Thermal Shock Test Chamber
Specifications
| System | Two-zone test by means of damper switching | ||||||
| Three-zone chamber | |||||||
| Performance | Test area | High temp. exposure range*1 | +60~ to +200°C | ||||
| Low temp. exposure range*1 | -65to 0 °C | ||||||
| Temp. fluctuation *2 | ±1.8°C | ||||||
| Hot chamber | Pre-heat upper limit | +200°C | |||||
| Temp. heat up time*3 | Ambient temp. to +200°C within 30min | ||||||
| Cold chamber | Pre-cool lower limit | -65°C | |||||
| Temp. pull down time*3 | Ambient temp. to -65°C within 70min | ||||||
| Temp. recovery (2-zone) | Recovery conditions | Two-zone: High temp. exposure +125°C 30 min, Low temp. exposure -40°C 30 min; Specimen 6.5 kg (specimen basket 1.5kg) | |||||
| Temp. recovery time | Within 10 min. | ||||||
| Construction | External material | Cold-rolled rust-proofed steel plate | |||||
| Test area material | SUS304 stainless steel | ||||||
| Door*4 | Manually operated door with unlock button | ||||||
| Heater | Strip wire heater | ||||||
| Refrigeration unit | System*5 | Mechanical cascade refrigeration system | |||||
| Compressor | Hermetically sealed scroll compressor | ||||||
| Expansion mechanism | Electronic expansion valve | ||||||
| Refrigerant | High temp side:R404A, Low temp side R23 | ||||||
| Cooler | Stainless steel welded plate heat exchanger | ||||||
| Air circulator | Sirocco fan | ||||||
| Damper driving unit | Air cylinder | ||||||
| Fittings | Cable port with diameter 100mm on the left side (right side and tailor made diameter size are available as options), specimen power supply control terminal | ||||||
| Inside dimensions (W x H x D) | 350 x 400 x 350 | 500 x 450 x 450 | Customized | ||||
| Test area capacity | 50L | 100L | Customized | ||||
| Test area load | 5 kg | 10 kg | Customized | ||||
| Outside dimensions (W x H x D) | 1230 x 1830 x 1270 | 1380 x 1980 x 1370 | Customized | ||||
| Weight | 800kg | 1100kg | N/A | ||||
|
Utility requirements
|
Allowable ambient conditions | +5~30°C | |||||
| Power supply | AC380V, 50/60Hz, three phase , 30A | ||||||
| Cooling water supply pressure*6 | 02~0.4Mpa | ||||||
| Cooling water supply rate*6 | 8m³ /h | ||||||
| Operating cooling water temp. range | +18 to 23 °C | ||||||
| Noise Level | 70 dB or lower | ||||||
Performance:
Temperature recovery time shortened with the two-zone system
Meets International standards
Improved temperature uniformity performance
Reduced test time by means of test area transfer
Specimen Temperature Trigger (STT) function
Utility:
Boast of a 100L capacity
Smooth specimen transfer
Test area anti-drop mechanism to protect specimens
Safe specimen handling thanks to ambient temperature recovery
Easy wiring access
Viewing window (option)
Comprehensive safety system
Safety Devices:
Hot chamber overheat protection switch
Cold chamber overheat protection switch
Air circulator overload alarm
Refrigerator high/low pressure protector
Compressor temperature switch
Air pressure switch
Fuse
Water suspension relay ( water-cooled specification only)
Compressor circuit breaker
Heater circuit breaker
Test area overheat/overcool protector
Air purge valve
Our service:
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.
2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.
3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.
4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.
FAQ:
1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.
Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.
2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.
3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.
4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.
Write your message here and send it to us
