• page_banner01


Auto safety glass pendulum impact tester with double tire impactor


Pendulum impact tester is use for the construction of glass, safety glass impact test, is to test the safety of glass in the same mass under the impact of different height under the impact of different penetration resistance or strength of a special device, its technology in line with GB9962, GB9963 standard The relevant provisions.

Product Detail

Product Tags

Production standards

ANSI Z97.1-2004, ISO/DIS12542 1~12543-6:1997, AS/NZS2208:1996, GB/T9962-1999 and other standards.

Main performance

Characteristics 1, because the tire weight 45.4±0.2kg, The center of the impactor from the ground height =76in/2+48in+6in=92in(2337mm) ,Manpower is unable to operate , so the design of electric lift pneumatic tires, raised the height of the actual test requirements and adjust;

2, due to swing arm height 12in(305mm)、18in(457mm)、24in(610mm)、30in(762)、36in(915)、48in(1220mm) adjustable, swing arm radius of 60in(1524mm), so the use of stepper motor drive precision winding wire rope, through the winding wire rope to raise the arm height;

3, the main frame are made of GB 3.9in(100mm )channel welded, the surface polished by polishing and spraying ; swing arm wire rope made of the national standard high-quality rope with 1/8inch (3mm) diameter , the motor wire rope is also used 1/8inch (3mm) wire rope;

4, the use of electromagnetic clutch release lead bomb pocket, pendulum electric control reset;

Impact mode

Pendulum style

Swing arm radius

About 77in(1950mm)

Impact height

12-48in(305~1220mm)(The height of the impactor relative to the specimen center line) adjustable

Impactor weight


Lift control deviation


Sample size

About H76inxW34in (H1930xW865±2mm)

Rubber strip size

W0.79in(20±2mm) thickness:0.39in(10±1mm) hardness:60±5IRHD

Sample Wooden frame internal dimensions


Outer fame size

About W47.2in×D71in×H92in(W1200×D1805×H2340mm)


About 750kg



Wire rope diameter


Wire rope length


Maximum impact height


Impactor trip Method

Pneumatic Column Traction Tripping

Height measuring element

Own height pole

Fixed way

Anchor bolts fixed

  • Previous:
  • Next:

  • Write your message here and send it to us