UP-6300 Ipx3 Ipx4 Auto Parts Rain Waterproof Test Chamber

Waterproof Test Chamber is an equipment designed to simulate various water exposure conditions (such as dripping, spray, splashing, or even immersion) to evaluate the sealing integrity and water resistance rating of a product. It utilizes a precisely controlled water spray system to test products in accordance with international standards (e.g., IP Code, IEC 60529). The purpose is to verify whether the product can effectively prevent water ingress under specified pressure and duration, ensuring the reliability and durability of items like electronic devices, automotive parts, and outdoor lighting.

Send email to us

Product Detail

SERVICE AND FAQ:

Product Tags

Product Introduction:

This product is suitable for testing electrical products, enclosures, and seals to ensure the proper performance of equipment and components in rainy conditions. Its scientific design enables it to realistically simulate various water spray, splashing, and spraying environments, testing the physical and other related properties of the product.

It is widely used for testing the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, coaches, buses, motorcycles, and their parts under simulated rainy conditions. After testing, verification is used to determine whether the product's performance meets the requirements, facilitating product design, improvement, verification, and factory inspection.

Standards:

IPX3 and IPX4 protection levels as specified in GB4208-2017 Degrees of Protection Enclosures (IP Code);
IPX3 and IPX4 protection levels as specified in IEC 60529:2013 Degrees of Protection Enclosures (IP Code). ISO 20653:2006 Road Vehicles - Degrees of Protection (IP Code) - IPX3 and IPX4 Degrees of Protection for Electrical Equipment Against Foreign Objects, Water, and Contact;
GB 2423.38-2005 Electric and Electronic Products - Environmental Testing - Part 2 - Test R - Water Test Methods and Guidelines - IPX3 and IPX4 Degrees of Protection;
IEC 60068-2-18:2000 Electric and Electronic Products - Environmental Testing - Part 2 - Test R - Water Test Methods and Guidelines - IPX3 and IPX4 Degrees of Protection.

Technical Performance:

Inner Box Dimensions: 1400 × 1400 × 1400 mm (W * D * H)
Outer Box Dimensions: Approximately 1900 × 1560 × 2110 mm (W * D * H) (actual dimensions subject to change)
Spray Hole Diameter: 0.4 mm
Spray Hole Spacing: 50 mm
Oscillating Pipe Radius: 600 mm
Oscillating Pipe Total Water Flow: IPX3: 1.8 L/min; IPX4: 2.6 L/min
Spray Hole Flow Rate:
1.Sprays within a ±60° angle from vertical, maximum distance 200 mm;
2.Sprays within a ±180° angle from vertical;
3.(0.07 ±5%) L/min per hole multiplied by the number of holes
Nozzle Angle: 120° (IPX3), 180° (IPX4)
Oscillating Angle: ±60° (IPX3), ±180° (IPX4)
Spray Hose Oscillating Speed IPX3: 15 times/min; IPX4: 5 times/min
Rainwater pressure: 50-150kPa
Test duration: 10 minutes or more (adjustable)
Preset test time: 1s to 9999H59M59s, adjustable
Turntable diameter: 800mm; Load capacity: 20kg
Turntable speed: 1-3 rpm (adjustable)
Inner/outer case material: SUS304 stainless steel/iron plate, spray-coated with plastic

Working environment:

1. Operating voltage: AC220V single-phase three-wire, 50Hz. Power: Approximately 3kW. A separate 32A air switch must be installed. The air switch must have wiring terminals. The power cord must be ≥ 4 square meters.
2. Water Inlet and Drain Pipes: After planning the equipment placement, please install the circuit breaker next to it in advance. Install the water inlet and drain pipes below the circuit breaker. The water inlet pipe (a four-branch pipe with a valve) and the drain pipe (a four-branch pipe) should be flush with the floor.
3. Ambient Temperature: 15°C to 35°C;
4. Relative Humidity: 25% to 75% RH;
5. Atmospheric Pressure: 86kPa to 106kPa.

Previous: UP-6201 Temperature Control Steam Aging Tester

Next: UP-6300 IPX5/6 Waterproof Test Machine

Our service:

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.

2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.

3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.

4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.

FAQ:

1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.

Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.

2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.

3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.

4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.

IEC 60529