UP-6195 touch Screen Constant Temperature and Humidity Test Chamber

Description:

Our constant temperature and humidity test chamber are suitable for various small electrical appliances, instruments, automobiles, aviation, electronic chemicals, materials and components, and other damp heat tests. It is also suitable for aging tests. This test box adopts the most reasonable structure and stable and reliable control method at present, making it beautiful in appearance, easy to operate, safe, and high in temperature and humidity control accuracy. It is an ideal piece of equipment for constant temperature and humidity testing. The programmable constant temperature and humidity box meet the requirements of GB, JGB, ASTM, JIS, and ISO.
Programmable constant temperature and humidity test chamber in the test process, refrigeration, heating, dehumidification, humidification, and supplementary humidification water are fully automatically controlled. It is mainly suitable for comprehensive environmental tests that generate temperature and humidity. It can also generate separate high temperature, low temperature, and cross-temperature tests. A test environment with constant heat and humidity.

Send email to us

Product Detail

SERVICE AND FAQ:

Product Tags

Standards:

GB11158 , GB10589-89, GB10592-89, GB/T10586-89 ,GB/T2423.1-2001 , B/T2423.2-2001 ,GB/T2423.3-93 , GB/T2423.4-93 ,GB/T2423.22-2001,
IEC60068-2-1.1990

MIL-STD-810F-507.4/ MIL-STD883C 1004.2 ,JIS C60068-2-3-1987 IEC68-2-03 ASTM D1735 , JESD22-A101-B-2004,JESD22-A103-C-2004 JESD22-A119-2004 etc.

Product parameters:

Temp. range	-40ºC ~ +150ºC
Temp. fluctuation	±0.5ºC
Temp. uniformity	<=2.0ºC
Heating rate	from -40ºC to +100ºC within 60min (No load, ambient temperature +25ºC)
Temp. decrease rate	from +20ºC to -40ºC within 60min (No load, ambient temperature +25ºC)
Humidity control range	20%R.H~98%R.H
Humidity deviation	±3.0%RH(>75%RH) ±5.0%RH(≤75%RH)
Humidity uniformity	±3.0%RH(no load)
Humidity fluctuation	±1.0%RH
Inside dimensions: WxHxD(mm)	500x600x500	500x750x600	600×850×800		1000×1000×800	1000×1000×1000
Outside box size: WxHxD(mm)	720×1500×1270	720×1650×1370	820×1750 ×1580		1220×1940 ×1620	1220×1940 ×1820
Warm-keeping box	Outer chamber material: high quality carbon steel plate, surface for electrostatic color spray treatment. The left side of the box is φ50mm diameter hole Inner material :SUS304# stainless steel plate. Insulation material: hard polyurethane foam insulation layer + glass fiber.
Door	For a single door, install a heating wire in the door frame to prevent condensation in the door frame at low temperature.
Inspection window	The W 300×H 400mm observation window is installed on the door of the box, and multi-layer hollow electro thermal coated glass can effectively keep heat and prevent condensation.
Lighting device	1 LED lighting device, installed on the window.
Sample holder	Stainless steel sample rack 2 layers, height adjustable, bearing weight 30kg/ layer.
Refrigeration compressor	France Tecumseh fully closed compressor
Coolants	Non-fluorine environmental refrigerant R404A, in line with environmental regulations, safe and non-toxic
Condenser system	air-cooled
Safety protection device	Heater anti-burning protection; Humidifier anti-burn protection; Heater overcurrent protection; Humidifier overcurrent protection; Circulating fan overcurrent overload protection; Compressor high pressure protection; Compressor overheat protection; Compressor overcurrent protection; Overvoltage underinverse-phase protection; Circuit breaker; Leakage protection; Humidifier low water level protection; Tank low water level warning.
Power	AC220V;50Hz;4.5KW	AC380;V50Hz;6KW	AC380;V50Hz;7KW	AC380;V50Hz;9KW		AC380;V50Hz;11KW

Previous: UP-6117 Simulation Solar Radiation Xenon Lamp Weathering Resistance Aging Test Chamber

Next: UP-6195 Temperature Cycles Accelerate Aging Chamber For Electronic Components

Our service:

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.

2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.

3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.

4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.

FAQ:

1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.

Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.

2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.

3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.

4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.

Benchtop Humidity Chamber