• page_banner01


UP-3004 Water Impact Penetration Tester


Water Impact Penetration Tester is used to determine the water resistance of fabrics under low impact conditions, and to predict the rain resistance of wearing fabrics.

Spray a certain amount of water from a height of (610±10) mm from the sample to be tested to the suSMace of the sample with a certain tension, and attach a known weight of absorbent paper on the back of the sample. After spraying, weigh the mass of absorbent paper again and calculate the permeability.

Product Detail

Product Tags

Product Description

One end of the specimen is clamped on the steel plate with the metal spring clamp along the width direction. The length of the metal spring clamp mouth is (152 ± 10) mm, and the total mass is (152 ± 10) mm( zero point four five + zero point zero five )Kg metal spring clamps the other free end of the sample, and the test suSMace of the sample is subject to spray. Weigh the mass of white absorbent paper (152 ± 10) mm × (229 ± 10) mm to the nearest 0.1g And insert it between the sample and the test bench.

Pour (500 ± 10) ml of reagent into the funnel of the tester to spray the sample, and avoid vortex as much as possible during water pouring.

After the completion of spraying (2S after the continuous spraying stops), take out the absorbent paper carefully, and quickly weigh the mass of the absorbent paper to the nearest 0.1g

Testing Scope: Waterproof fabric, Coating fabric, Diving suit, Medical Protective Clothing Material, etc;

Testing Standards: 

AATCC 42 GB/T 33732 GB/T 24218
YY/T 1632 YY/T 1499 ISO 18695


1. Funnel height: 610mm ± 10 mm

2. The angle of slip and loss platform is 45 °;

3. Nozzle inner diameter 45.4mm, 25 holes, 0.99mm ± 0.005mm.

UP-3004 Water Impact Penetration Tester-01 (4)
UP-3004 Water Impact Penetration Tester-01 (5)
UP-3004 Water Impact Penetration Tester-01 (6)
UP-3004 Water Impact Penetration Tester-01 (7)

  • Previous:
  • Next:

  • Write your message here and send it to us