Products
HB-3000T Brinell Hardness Tester
Scope of Application
Determination of Brinell hardness of ferrous, non-ferrous and bearing alloy materials.
Such as cemented carbide, carburized steel, hardened steel, surface hardened steel, hard cast steel, aluminum alloy, copper alloy, malleable casting, mild steel, quenched and tempered steel, annealed steel, bearing steel, etc. Widely used for testing large springs and thick-walled steel pipes.
Features
1. Car baking paint, high-grade paint quality, strong anti-scratch ability, and still bright as new after many years of use;
2. The strong and weak electricity phases of the control panel are separated, which avoids mutual interference and breakdown of the panel due to excessive current, and improves the safety of operation and the service life of the panel;
3. High-power solid state relay, high power, low power consumption, no contact, no spark, high isolation between control and controlled, and long service life;
4. Solid structure, good rigidity, accurate, reliable, durable, and high test efficiency;
5. Overload, over-position, automatic protection, electronic afterburner, no weight;
6. The test process is automated, and there is no human operation error;
7. The high-torque permanent magnet synchronous motor replaces the old-fashioned reducer, so that the machine has low noise and extremely low failure rate;
8. Accuracy conforms to GB/T231.2, ISO6506-2 and American ASTM E10 standards.
Technical Parameters
1. Measuring range: 5-650HBW
2. Test force: 1838.8, 2415.8, 7355.3, 9807, 29421N
(187.5, 250, 750, 1000, 3000kgf)
3. The maximum allowable height of the sample: 500mm;
4. Distance from the center of the indenter to the machine wall: 180mm;
5. Dimensions: 780*460*1640mm;
6. Power supply: AC220V/50Hz
7. Weight: 400Kg.
The standard Configuration
● Large flat workbench, small flat workbench, V-shaped workbench: 1 each;
● A bow-shaped table for testing springs and steel pipes, the inner diameter of the workpiece to be tested is Φ70 to Φ350mm, and the wall thickness of the workpiece to be tested is ≤42mm; (can also be customized according to product size)
● Steel ball indenter: Φ2.5, Φ5, Φ10 each 1;
● Standard Brinell hardness block: 2
