UP-6316 Dust Protection Level Test Chamber

Dustproof Test Chamber is a laboratory device designed to simulate sand and dust environments.

It is primarily used to evaluate the sealing performance (specifically the dust ingress protection aspect of IP ratings) of products such as electronic components, automotive parts, outdoor lighting, and communication equipment.

By precisely controlling the concentration of dust, temperature, and airflow, it assesses the ability and reliability of a product’s enclosure to prevent the penetration of dust particles.

Send email to us

Product Detail

SERVICE AND FAQ:

Product Tags

Use:

It simulates the destructive effect of natural wind and sand climate on the product and is suitable for testing the seal performance of the product enclosure.It is mainly used for testing the two grades of IP5X and IP6X specified in the enclosure protection standard.Carrying dust vertical circulation of air,test equipment with dust can be recycled,the whole duct made of imported advanced stainless steel plate at the bottom of the air duct connected with taper hopper interface,fan outlet directly connected to the air duct,and then in the appropriate position will studio top spread port access studio,forming vertical blowing dust"O"type closed loop system,make the air can flow smoothly,large extent makes the dust dispersed evenly.A single high power low noise centrifugal fan is used to adjust the wind speed according to the test requirements.

Characteristics:

1.The user can independently control the conditions of F1,F2 and F3 on the panel with the powerful dust spraying device.

2.Use vibration equipment to make the dust concentration of each spraying be the same.

3.The precision dust concentration collector can reduce the estimation of concentration due to improper operation.

4.Dust and dust can be Shared

5.The sand and dust test box is applicable to test the sealing performance of the product enclosure.It is mainly used for the test of the two grades of IP5X and IP6X specified in the enclosure protection standard.

Standards:

IEC 60529, IPX5/6, GB2423.37, GB4706, GB 4208, GB 10485, GB 7000.1, GJB 150.12, DIN.

Specifications:

Model	UP-6316-A	UP-6316-C
Inner size(mm)	800800800	100010001500
Species	Talcum powder
Duration time	2hours or 8 hours
Test temperature	RT~7ºC
Test humidity	45%-75%RH
Nominal diameter of metal screen mesh	50μm
Nominal spacing between lines	75μm
Windspeed	≥2m/s
Dust concentration	2~4Kg/m3
Dust requirements	Meet with JIS6 requirement(Or national standards)
Oscillator period	0-99H99M99S
Blowingdustset	The time of continuous and periodic dusting is determined arbitrarily
External material	High quality cold rolled steel sheet electrostatic spraying
Inner material	SUB304Precision welding of quality stainless steel plate
Thermalinsulationmaterial	Ultrafine glass fiber cotton
Safety protection	Overtemperature and overlimit alarm protection,power leakage,short circuit,lack of phase protection,undervoltage protection
Power	AC220/380V±10%,1PH,50/60HZ
Standardconfiguration	Vacuum pump one,gas flowmeter,air source excuse,pressure gauge,oil and water separator

Previous: UP-6118 Two-door Thermal Shock Test Chamber

Next: UP-6316 Lab Sand And Dust Proof Test Chamber

Our service:

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.

2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.

3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.

4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.

FAQ:

1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.

Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.

2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.

3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.

4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.

Dust Sealing Tester