UP-6122 Ozone Aging Test Chamber

Features:

1. The testing system structure design is reasonable, the manufacturing process is standardized, and the appearance is beautiful and elegant.

2. 24-hour online continuous testing, data can be checked at any time.

3. It adopts an integrated ozone concentration, temperature, and humidity controller (set by a touch button), with high integration, good reliability, LED display, display resolution temperature (0.1 ºC), ozone concentration (1pphm), PID setpoint control, and easy operation.

4. The dedicated ozone detector meets internationally recognized ozone detection standards, with stable performance, automatic zero point control, no ozone cold light source ultraviolet lamp, long lifespan, and high accuracy.

5. Reserved interface for classic chemical testing of ozone concentration, convenient for calibration analysis and testing.

6. The device has the following safety protection devices: power overload, short circuit

Send email to us

Product Detail

SERVICE AND FAQ:

Product Tags

Structure introduction:

1. The test box is an integral structure. The air handling system is located at the lower rear of the box, and the detection and control system is located on the right side of the test box.

2. The studio has air duct interlayers on three sides, distributed heating humidifiers (ordered according to model), circulating fan blades and other devices. The upper layer of the test chamber is equipped with a balanced exhaust hole. The gas in the testing room needs to be continuously discharged to maintain the balance of gas concentration in the testing chamber. The test box has only one door and is sealed with ozone resistant silicone rubber.

3. The test chamber is equipped with an observation window and switchable lighting.

4. The touch screen intelligent controller is located on the right front of the device.

5. Air circulation device: Equipped with a built-in circulation air duct, the test airflow is uniformly parallel to the surface of the sample from top to bottom.

6. The shell is made of high-quality cold-rolled sheet and the surface is electrostatically sprayed.

7. The air source adopts an electromagnetic oil-free air pump.

8. Stainless steel magnetic electric heater.

9. Silent discharge ozone generator component.

10. Specialized motor, centrifugal convection fan.

11. Install a water tank for water supply, with automatic water level control.

12. Gas flowmeter, precise control of gas flow rate at each stage.

13. Equipped with gas purification device. (Activated carbon absorption and silica gel drying tower)

14. Embedded industrial control integrated computer (7-inch color touch screen).

UP-6122 Customized Uv Aging Test Chamber

UP-6122Electrostatic Discharge Ozone Aging Test Chamber2

Previous: UP-2003 Industrial-Use Metal Tensile Strength Test Machine

Next: UP-6122 OZONE Aging Testing Equipment For Polymer

Our service:

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote the most suitable price according to customer requirements.

2) Specifications customize process:Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.

3) Production and delivery process:We will produce the machines according to confirmed PO requirements. Offering photos to show the production process. After finishing production, offer photos to the customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing. Deliver the products is confirmed shipping time and inform the customer.

4) Installation and after-sale service:Defines installing those products in the field and providing after-sales support.

FAQ:

1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?Yes, we are the one of professional Manufacturers like Environmental Chambers, Leather shoe testing equipment, Plastic Rubber testing Equipment… in China. Every machine purchased from our factory has 12 months warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.

Moreover, If your machine doesn’t work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.

2. What about the delivery term?For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days; If there is no stock, normally, the delivery time is 15-20 working days after payment received; If you are in urgent need, we will make a special arrangement for you.

3. Do you accept customization services? Can I have my logo on the machine?Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.

4. How can I install and use the machine?Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email. Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it.

Accelerated Aging Test Chamber