UP-6112 LED photoelectric e sa khaotseng mocheso le mongobo lebokose la teko ea Featured Image

UP-6112 LED photoelectric mocheso o sa khaotseng le lebokose la tlhahlobo ea mongobo

Lebokose la tlhahlobo la mocheso le mongobo oa LED bakeng sa mefuta e fapaneng ea lihlahisoa tsa LED (li-chips tsa LED, likarolo tsa LED, mabone a LED, li-tubes tsa LED, li-module tsa LED), etsa liteko tse nepahetseng tsa ho tšepahala tikolohong, lekanya bophelo ba tšebeletso ea LED le ho lekola litšobotsi tsa sehlahisoa; Lekola mocheso o phahameng Mongobo o phahameng, tlhahlobo ea ts'ebetso ea mocheso o phahameng le o tlase, potoloho ea mocheso ... joalo-joalo.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

TŠEBELETSO LE FAQ:

Li-tag tsa Sehlahisoa

Mohlala		UP-LED500	UP-LED800	UP-LED1000	UP-1500
Boholo ba ka hare(mm)		500x500x600	1000x800x1000	1000x1000x1000	1000x1000x1500
Kantle（mm）		1450X1400X2100	1550X1600X2250	1550X1600X2250	1950X1750X2850
Tshebetso	Temp Range	0 ℃/-20℃/-40℃/-70℃～+100℃/+150℃/+180℃
	Ho lumellana ha nako	≤2℃
	Ho kheloha ha nako	±2℃
	Phetoho ea mocheso	≤1℃（≤±0.5℃, sheba GB/T5170-1996）
	Nako ea ho futhumatsa	+20 ℃～+100℃hoo e ka bang30m/+20℃～+150 ℃ hoo e ka bang metsotso e 45
	Nako ea ho pholisa	+20 ℃～-20 ℃ hoo e ka bang 40m /从+20℃～-40℃hoo e ka bang 60m/从+20℃～-70 ℃ hoo e ka bang 70m
Sebaka sa mongobo		20～98% RH
Ho kheloha ha mongobo		±3%(75%RH ka tlase), ±5%(75%RH holimo)
Temp Controller		Sekirini sa 'mala oa Sechaena le Senyesemane + selaoli sa PLC
Mokhoa o fokolang oa ho ikamahanya le maemo		Kopana le ts'ebetso ea othomathike ea compressor sebakeng sa mocheso o felletseng
Mokhoa oa ts'ebetso ea lisebelisoa		Ts'ebetso ea boleng bo tsitsitseng, ts'ebetso ea lenaneo
Mokhoa oa ho Pholisa	Compressor e kentsoeng kantle ho naha	Compressor e kentsoeng kantle ho naha
	Mohatsela o phodileng	Mohatsela o phodileng
Metsi a humidification		Metsi a hloekisitsoeng kapa a hloekisitsoeng
Mehato ea tšireletso ea tšireletso		Ho lutla, potoloho e khuts'oane, mocheso o feteletseng, khaello ea metsi, mocheso o feteletseng oa motlakase, compressor holim'a khatello, boima bo feteletseng, ho feta hona joale.
Matla -40°C (KW)		9.5KW	11.5KW	12.5KW	16KW
Sesebelisoa se tloaelehileng		Shelf ea mohlala (sete tse peli), fensetere ea ho shebella, lebone le bonesang, lesoba la cable (Ø50 e le 'ngoe), e nang le li-caster
phepelo ea motlakase		AC380V 50Hz mekhahlelo e meraro ea terata + ea fatše
Lintho tse bonahalang	Lisebelisoa tsa likhetla	Ho fafatsa ka motlakase ka poleiti ea tšepe e pholileng (SETH mmala o tloaelehileng)
	Lintho tse ka hare tsa lebota	SUS304 poleiti ea tšepe e sa hloekang
	Lisebelisoa tsa Insulation	Foam e thata ea polyurethane

LED photoelectric kamehla mocheso le mongobo teko lebokose Features

◆ E na le liraka tsa liteko bakeng sa lihlahisoa tsa LED tse felileng;

◆ Fesetere e kholo e ka finyella sepheo sa tlhahlobo ea inthanete le ho shebella ka katleho;

◆ Kopana le teko ea matla le ea leeme ts'ebetsong ea teko ea LED, e nang le bokhoni ba ho kopanya le litaelo tsa puisano (Labview, VB, VC, C ++), e nang le 4. tsamaiso ea matla a ho laola matla a ho ema;

◆ E ka tšeptjoa haholo ho laola botsitso ba sehlahisoa sa mocheso o moholo oa thepa ka mocheso o phahameng le mongobo o phahameng, ho boloka mocheso o tlaase, le taolo ea potoloho ea tikoloho ea Seth;

◆ Ho rarolla bothata ba ho thibela condensation le phoka ea metsi ka katleho;

◆ E na le boema-kepe ba khokahanyo ea data ea RS232, polokelo ea data ea USB, le ts'ebetso ea ho jarolla;

◆ Ho finyella ka katleho mongobo o tlase 60 ° C (40 ° C) / 20% RH e sebetsang hantle;

◆ Ho rarolla bothata ba ho thibela condensation le phoka ea metsi ka katleho;

Mocheso o sa feleng oa mocheso oa LED oa photoelectric le lebokose la tlhahlobo ea mongobo o kopana le maemo

1. GB/T10589-1989 maemo a tekheniki a kamore ea teko ea mocheso o tlase; 2. GB/T10586-1989 mongobo mocheso teko kamoreng maemo a botekgeniki;

3. GB/T10592-1989 maemo a botekgeniki a maemo a phahameng le a tlase a mocheso oa kamore ea teko; 4. GB2423.1-89 teko ea mocheso o tlase Aa, Ab;

5. GB2423.3-93 (IEC68-2-3) teko ea mocheso e mongobo kamehla Ca; 6. Mokhoa oa MIL-STD810D 502.2;

7. GB/T2423.4-93 (MIL-STD810) mokhoa oa 507.2 mokhoa oa 3; 8. GJB150.9-8 teko ea mocheso o mongobo;

9.GB2423.34-86, MIL-STD883C mokhoa 1004.2 mocheso le mongobo o kopantsoeng teko ea potoloho;

10.IEC68-2-1 teko A; 11.IEC68-2-2 teko ea B e phahameng le e tlaase mocheso o fapanyetsana; 12.IEC68-2-14 teko N;

IEC 61215 Solar Module Teko ea ho Tšepahala

Teko ea potoloho ea mocheso oa IEEE 1513 & teko ea serame e mongobo le teko ea mocheso o mongobo

UL1703 Flat Panel Solar Safety Module Tekanyetso ea Setifikeiti

IEC 61646 Thin Film Solar Photovoltaic Module Tekanyetso ea Tekanyetso

IEC61730 Solar cell system - sebopeho le litlhoko tsa liteko

IEC62108 E Tsepamisitseng Moamoheli oa Letsatsi le Maemo a Tekolo ea Likarolo

E fetileng: UP-6195 Mocheso oa Mongobo oa ho Tsamaea ka Kamoreng

E 'ngoe: UP-6120 Sheba fensetere e nang le lesoba la ts'ebetso ea Climatic Stability Chamber

Tšebeletso ea rona:

Nakong ea ts'ebetso eohle ea khoebo, re fana ka litšebeletso tsa Consultative Selling.

1) Mokhoa oa ho botsa bareki:Ho buisana ka litlhoko tsa tlhahlobo le lintlha tsa tekheniki, ho khothalelitse lihlahisoa tse loketseng ho moreki ho netefatsa. Ebe u qotsa theko e loketseng ka ho fetisisa ho latela litlhoko tsa bareki.

2) Litlhaloso tsa mokhoa o ikhethileng:Ho taka litšoantšo tse amanang le tsona ho netefatsa le moreki bakeng sa litlhoko tse ikhethileng. Fana ka linepe tsa litšupiso ho bontša chebahalo ea sehlahisoa. Ebe, netefatsa tharollo ea ho qetela mme u netefatse theko ea ho qetela le moreki.

3) Ts'ebetso ea tlhahiso le phano:Re tla hlahisa mechini ho latela litlhoko tse netefalitsoeng tsa PO. Ho fana ka linepe ho bonts'a ts'ebetso ea tlhahiso. Kamora ho qeta tlhahiso, fana ka linepe ho moreki ho netefatsa hape ka mochini. Ebe u etsa calibration ea feme kapa motho oa boraro (joalo ka litlhoko tsa bareki). Sheba 'me u leke lintlha tsohle ebe u hlophisa ho paka. Fana ka lihlahisoa e tiisitsoe nako ea ho romela le ho tsebisa moreki.

4) Ts'ebeletso ea ho kenya le ka mor'a thekiso:E hlalosa ho kenya lihlahisoa tseo tšimong le ho fana ka tšehetso ea ka mor'a thekiso.

LBH:

1. Na u Moetsi? O fana ka litšebeletso tsa ka mor'a thekiso? Nka kopa seo jwang? Mme ho thoe'ng ka waranti?E, re ba bang ba Baetsi ba litsebi ba kang Likamore tsa Tikoloho, Lisebelisoa tsa ho hlahloba lieta tsa Letlalo, Lisebelisoa tsa ho hlahloba Rabara ea Plastiki… Chaena. Mochini o mong le o mong o rekiloeng fekthering ea rona o na le waranti ea likhoeli tse 12 kamora ho romelloa. Ka kakaretso, re fana ka likhoeli tse 12 bakeng sa tlhokomelo ea MAHALA. ha re ntse re nahana ka lipalangoang tsa leoatle, re ka eketsa likhoeli tse 2 bakeng sa bareki ba rona.

Ho feta moo, Haeba mochine oa hau o sa sebetse, o ka re romella e-mail kapa oa re letsetsa re tla leka ka hohle ho fumana bothata ka moqoqo oa rona kapa ka puisano ea video ha ho hlokahala. Ha re se re netefalitse bothata, tharollo e tla fanoa nakong ea lihora tse 24 ho isa ho tse 48.

2. Ho thoe'ng ka nako ea ho fana?Bakeng sa mochine oa rona o tloaelehileng o bolelang mechine e tloaelehileng, Haeba re na le thepa ka tlung ea polokelo, ke matsatsi a 3-7 a mosebetsi; Haeba ho se na setoko, ka tloaelo, nako ea ho fana ke matsatsi a 15-20 ka mor'a hore tefo e amoheloe; Haeba u hloka ka potlako, re tla u etsetsa tokisetso e khethehileng.

3. Na u amohela lits'ebeletso tsa ho itlhophisa? A na nka fumana letšoao laka mochining?Ehlile ho joalo. Re ke ke ra fana ka mechini e tloaelehileng feela empa hape le mechini e ikhethileng ho latela litlhoko tsa hau. Hape re ka kenya logo ea hau mochining ho bolelang hore re fana ka litšebeletso tsa OEM le ODM.

4. Nka kenya mochine oo le ho o sebelisa joang?Hang ha u se u laetse mechini ea liteko ho rona, re tla u romella bukana ea ts'ebetso kapa video ka mofuta oa Senyesemane ka Imeile. Boholo ba mochine oa rona o romelloa ka karolo e feletseng, e bolelang hore e se e kentsoe, o hloka feela ho hokahanya thapo ea matla le ho qala ho e sebelisa.

Ngola molaetsa wa hao mona mme o re romele wona