UP-3013 Charpy Impact Tester

Product Description

Hom charpy impact tester no tsuas yog siv los ntsuas qhov cuam tshuam ntawm cov yas nruj, siv zog nylon, fiberglass, ceramics, cam khwb cia pob zeb, cov ntaub ntawv rwb thaiv tsev thiab lwm yam khoom tsis yog xim hlau.Nws yog cov cuab yeej siv tshuaj ntsuam xyuas zoo tshaj plaws hauv kev lag luam tshuaj lom neeg, cov chaw tshawb fawb tshawb fawb, cov tsev kawm qib siab thiab cov chaw soj ntsuam zoo.

Xa email rau peb

Product Detail

Khoom cim npe

Cov qauv kev ua haujlwm

TS ISO 179-2000 Kev txiav txim siab ntawm cov yas - Cov ntaub ntawv nyuaj Charpy Impact Strength

GB/T1043-2008 Rigid Plastic Charpy Impact Test Method

JB/T8762—1998 Plastics Charpy Impact Testing Tshuab

GB/T 18743-2002 Charpy Impact Test Method for Fluid Transport Via Thermoplastic Pipe (Zoo rau cov yeeb nkab)

Khoom yam ntxwv

A. High-precision intelligent controller nruab nrog LCD zaub uas koj tuaj yeem nyeem cov ntaub ntawv intuitively thiab raug;

B. Tuam Tshoj tus thawj carbon fiber lever (Nws tau patented);nws ua tiav hauv kev sim ua yam tsis muaj kev cuam tshuam nrog kev cuam tshuam cov kev taw qhia, txhim kho cov khoom nruj ntawm cov ntaub ntawv, thiab tsom rau kev cuam tshuam lub zog ntawm lub centroid ntawm lub pendulum, thiab siv lub neej nce.

C. Imported high-resolution digital encoders, siab dua thiab ruaj khov lub kaum sab xis ntsuas qhov tseeb;

D. Aerodynamic cuam tshuam rau rauj thiab cov pob bearings txawv teb chaws zoo heev txo cov neeg kho tshuab kev sib txhuam

E. Tsis siv neeg suav ntawm qhov kawg tshwm sim, 12 pawg ntawm cov ntaub ntawv xeem tuaj yeem khaws cia thiab nruab nrab;

F. Kev xaiv interface ntawm Suav thiab Askiv;units (J / m, KJ / m2, kg-cm / cm, ft-ib / hauv) tuaj yeem kho raws li cov neeg siv khoom xav tau.

G. Built-in mini tshuab luam ntawv los luam cov ntaub ntawv xeem

Technical Parameters

Yam khoom	Charpy Impact	Izod Impact
Pendulum zog	1 J, 2J, 4J, 5J	1 J, 2.75J, 5.5J
Pendulum lub kaum sab xis	150 °
Hniav kaum	30 °
Hniav pem hauv ntej lub kaum sab xis	5°
Hniav back angle	10 °
Kev cuam tshuam ceev	2.9 m / s	3.5m / s
Impact center nrug	221mm ib	3 35mm
Hniav filleted radius	R = 2 hli ± 0.5 hli	R = 0.8 hli ± 0.2 hli
Zog poob	0.5J ≤ 4.0J 1.0J ≤ 2.0J 2.0J ≤ 1.0J ≥4.0J≤0.5J	2.75J ≤ 0.06J 5.5J ≤ 0.12J
Pendulum torque	Pd1J = 0.53590Nm Pd2J = 1.07180Nm Pd4J = 2.14359Nm Pd5J = 2.67949Nm	Pd2.75J = 1.47372 Nm Pd5.5J = 2.94744 Nm
Luam tawm	Muaj peev xwm.Lub kaum sab xis, lub zog, thiab lwm yam.
Fais fab mov	AC220V ± 10% 50HZ