UP-2001Digital Display Electronic Tensile Tester

Nqe lus piav qhia:

Peb lub tshuab kuaj cov khoom siv thoob ntiaj teb yog tsim rau kev lag luam aerospace, petrochemical kev lag luam, kev tsim tshuab, cov khoom siv hlau thiab cov khoom siv, cov xov hlau thiab cables, roj hmab thiab yas, cov khoom siv ntawv thiab cov xim luam ntawv ntim, nplaum nplaum, hnab ntim khoom, woven siv, textile fibers, textile hnab , Khoom noj khoom haus, tshuaj thiab lwm yam lag luam.Nws tuaj yeem kuaj lub cev muaj zog ntawm ntau yam khoom siv thiab cov khoom tiav thiab cov khoom ua tiav.Koj tuaj yeem yuav ntau yam khoom siv rau tensile, compressive, tuav nro, tuav lub siab, khoov tsis kam, tearing, tev, adhesion, thiab shearing xeem.Nws yog qhov zoo tshaj plaws kev sim thiab kev tshawb fawb cov cuab yeej siv rau cov chaw tsim khoom thiab cov lag luam, cov chaw saib xyuas kev lag luam, cov koom haum soj ntsuam cov khoom, cov koom haum tshawb fawb, cov tsev kawm qib siab thiab cov tsev kawm qib siab.

Xa email rau peb

Product Detail

Khoom cim npe

Cov qauv

ASTM D903, GB / T2790 / 2791 / 2792, CNS11888, JIS K6854, PSTC7, GB / T 453, ASTM E4, ASTM D1876, ASTM D638, ASTM D412, ASTM F2256, EN17139, EN17139, EN1719, EN 1465, ISO 13007, ISO 4587, ASTM C663, ASTM D1335, ASTM F2458, EN 1465, ISO 2411, ISO 4587, ISO / TS 11405, ASTM D3330, FINAT thiab lwm yam.

Parameters thiab Specifications

1. Muaj peev xwm: 200KG (2kn)

2. Decomposition degree ntawm load: 1/10000;

3. Qhov tseeb ntawm kev ntsuas quab yuam: zoo dua 0.5%;

4. Kev ntsuas quab yuam zoo: 0.5 ~ 100% FS;

5. Sensor rhiab heev: 1--20mV / V,

6. Qhov tseeb ntawm qhov taw qhia kev hloov pauv: zoo dua ± 0.5%;

7. Qhov siab tshaj plaws kev kuaj mob stroke: 700mm, nrog rau fixture

8. Chav ntsuas hloov: suav nrog kgf, lbf, N, KN, KPa, Mpa ntau qhov ntsuas ntsuas, cov neeg siv kuj tuaj yeem hloov kho chav tsev xav tau;(nrog rau kev luam ntawv)

9. Tshuab loj: 43 × 43 × 110cm (W × D × H)

10. Tshuab hnyav: txog 85kg

11. Fais fab mov: 2PH, AC220V, 50/60Hz, 10A