UP-6197 Gidan Gwajin Fesa Gishiri Hotuna da aka Fito

Dakin Gwaji na Fesa Gishiri na UP-6197

Amfani:

Injin gwajin fesa gishiri na iya tantance juriyar lalata ƙarfe ko fim ɗin ƙarfe mara tsari ko gwajin fim ɗin halitta, kamar su electroplating, sarrafa anode, murfin juyawa, fenti da sauransu.

Aika mana imel

Cikakken Bayani game da Samfurin

SABIS DA TAMBAYOYIN DA AKE TAMBAYOYI:

Alamun Samfura

Bayanin Samfurin

(1)Suna:

Injin gwajin fesa gishiri daidai

(2)Samfuri:

AC ~~ 60/90/120/270(108L/)

(3)Bayani dalla-dalla:

(I) a cikin girman akwatin (W*D*H)mm: 600*450*400/ 900*600*500/ 1200*1000*500 /2000*1200*600
(Ii) Girman kwali (W*D*H)mm: kimanin 1075*1185*600/ 1410*880*1280/ 1900*1300*1400/ 2700*1500*1500
(Iii) Wutar Lantarki: 220V 10A / 220V 15A/ 220V 30A/ 220V 30A

(4)Kayan kabad:

(I) Gwada jikin chassis ɗin da faranti masu launin toka mai haske na PVC, kauri na 8mm, zafin jiki mai ɗorewa a 65 ° C.
(Ii) murfin dakin gwaje-gwaje mai haske allon PVC mai launin ruwan kasa, kauri 8mm, zafin jiki mai yawa baya karkatar da nakasa, tare da buɗe sandar murfi, ana iya buɗe kusurwar murfi, yana adana sararin shigarwa,
(Iii) Ɓoye kwalaben ƙarin kayan maye da aka haɗa, masu sauƙin tsaftacewa, masu sauƙin aiki.
(Iv) ƙarfin iska mai ƙarfi na SUS # 304 na bakin ƙarfe mai ƙarfi mai hana ruwa shiga.
(V) mai riƙe samfurin gwaji mai matakai uku, daidaita kusurwar samfurin da tsayin da aka yi da yardar kaina, kewaye da shi da kayan aiki daga hazo ta hanyar hazo daidai gwargwado, sakamakon gwaji daidai gwargwado, an sanya samfurin gwajin lamba. (Ana iya keɓance shi bisa ga buƙatun samfurin abokin ciniki)

(5) Thetushen fasaha:

Daidai da GB/T2423.17 GB/T10125-1997 GB10587 GB6460 GB10587 GB1771 ASTM-B117 GJB150 DIN50021-75 ISO-9227 ISO3768、ISO3769、 ISO3770 CNS 362/3885/4159/7669/8866 JISD-0201/H-8502/H-8610/K-5400/Z-2371,NSS,ACSS,CASS ma'aunin sigogi na aiki.
A, Gwajin fesa gishiri; NSS duba (1), ACSS duba (2).
Dakin gwaje-gwaje: 35 ℃ ± 1 ℃.
Matsi a cikin ganga mai matsin lamba: 47 ℃ ± 1 ℃.
a) gwajin fesa gishiri mai tsaka tsaki (gwajin NSS) shine fitowar farkon amfani da hanyoyin gwajin tsatsa da aka fi amfani da su. Yana amfani da maganin gishirin sodium chloride mai ruwa 5%, ana daidaita maganin ƙimar PH a cikin kewayon tsaka tsaki (6 zuwa 7) azaman fesawa tare da maganin. An ɗauki ƙimar zamiya zuwa buƙatun zafin gwaji na 35 ° C na fesa gishiri a cikin 1 ~ 2ml/80cm?. H tsakanin.

b) gwajin feshin gishirin acetic acid (gwajin ACSS) an ƙera shi ne bisa ga gwajin feshin gishiri mai tsaka-tsaki. An ƙara wani ɓangare na glacial acetic acid 5% na sodium chloride, an rage ƙimar PH na maganin zuwa kusan 3, kuma maganin ya zama mai tsami, sifar ƙarshe ta feshin gishiri mai tsaka-tsaki ya zama mai tsami. Yawan tsatsarsa fiye da gwajin NSS sau uku cikin sauri.
B, gwajin juriya ga lalata zuwa: CASS duba (3).
Dakin gwaje-gwaje: 50 ℃ ± 1 ℃.
Matsi a cikin ganga mai matsin lamba: 63 ℃ ± 1 ℃.

c) gwajin feshin gishirin acetic acid na jan ƙarfe (gwajin CASS) wani sabon gwaji ne na feshin gishiri mai sauri a ƙasashen waje, zafin gwajin shine 50 ° C, ƙara ƙaramin adadin gishirin jan ƙarfe - maganin gishirin jan ƙarfe chloride, yana haifar da tsatsa sosai. Yawan tsatsarsa ya ninka gwajin NSS sau 8.

(6) tsarin samar da iska:

Matsin iska na tsawon lokacin daidaitawar matakai biyu Don daidaita kusan 2Kg/cm2, matattarar iska mai shiga tare da magudanar ruwa, daidaitawar daidaici ta sec 1Kg/cm2, ma'aunin matsin lamba 1/4 don nuna daidaito da daidaito.

(7) Feshi:

(I) Bo Nute darussa na farko na saline sannan a samar da atomization iri ɗaya, babu wani cikas ga crystallization, don tabbatar da cewa ana gudanar da gwajin akai-akai.
(Ii) gilashin da aka yi wa bututun feshi mai zafi, girman feshi mai daidaitawa da kusurwar feshi.
(Iii) girman feshi na 1 ~ 2ml / h mai daidaitawa (ml/80cm2/h ana buƙatar ƙa'idodin gwaji na matsakaicin girman sa'o'i 16). Bututun aunawa ta amfani da shigarwar da aka gina a ciki, kyakkyawan kamanni mai kyau, an lura da shi, don rage sararin shigar da kayan aiki.

(8) tsarin dumama:

Dumama kai tsaye, dumama da sauri don rage lokacin jiran aiki, canzawa ta atomatik lokacin da zafin ya kai ga yanayin zafi mai ɗorewa, daidaitaccen zafin jiki da ƙarancin amfani da wutar lantarki. Bututun zafi na titanium tsarkakakke, juriya ga acid da alkali, tsawon rai na aiki.

(9) Tsarin sarrafawa:

(I) dakin gwaje-gwaje, ganga mai matsin lamba LCD dijital mai sarrafa zafin yuan dual, aikin lissafi ta atomatik, kuskuren sarrafawa na ± 1.0 ° C. Allon da'ira maganin hana lalatawa ne mai hana danshi, babban daidaito, tsawon rai.
(Ii) Tankin dumama ɗakin gwaji ta amfani da mai sarrafa zafin jiki mai faɗaɗa ruwa 30 ~ 150 ℃
(Iii) mai sarrafa lokaci na dijital mai wayo 0.1S ~ 99hrs mai shirye-shirye (zaɓi ne na fesawa mai ci gaba da zagayowar.
(Iv) makirci lokacin da 0 ~ 99999hr na
(V) jigilar kaya
(Vi) Makullin Rocker mai haske, zai iya aiki har sau 25,000.

(10) ƙara tsarin ruwa:

Ƙara tsarin ruwa na ganga mai matsin lamba ta atomatik ko ta hannu, ta atomatik ko ta hannu, matakin ruwan dakin gwaje-gwaje, da kuma hana-
An kawo ƙarshen ƙarancin ruwa a cikin na'urar lalata yanayin zafi mai tsanani.

(11) tsarin cire hazo:

Feshin gishiri na ɗakin gwaji mai tsabta, don hana lalacewar fitar iskar gas mai lalata kayan aikin dakin gwaje-gwaje.

(12) Na'urar kariya daga haɗari:

(I) ƙarancin matakin ruwa, yana kashe wutar lantarki ta atomatik, kuma yana nuna fitilun na'urar gargaɗin tsaro.
(Ii) yawan zafin jiki, yanke wutar hita ta atomatik, hasken na'urar gargaɗin tsaro yana nuna fitilun na'urar.
(Iii) matakin ruwan da aka kunna (saline) yana ƙasa, na'urar gargaɗin tsaro tana haskakawa.
(Iv) kariyar ɓuya, don hana raunin da mutum ya samu sakamakon da'irar ɓuya ko gazawar da'irar da kayan aiki.

(13)ya zo daidai da:

(I) Shelves guda 12
(Ii) auna silinda guda 1
(Iii) allurar nuna zafin jiki guda 1
(Iv) Mai tarawa guda 1
(V) bututun gilashi guda 1
(Vi) Kofin Danshi guda 1
Abin da aka makala: kwalabe 2
Umarnin Aiki 1 yanki
Kofin auna lita 5

Lura:Namu ɗakin fesa gishiri a bayyane matsin lamba Lallai ganga matakin ruwa kuma aikin ƙwaƙwalwar ajiyar gazawar wuta

Na baya: Tanda Mai Daidaita UP-6196

Na gaba: Ɗakin Gwajin Yanayi Mai Sauri na UP-6200 QUV

Sabis ɗinmu:

A duk lokacin da ake gudanar da harkokin kasuwanci, muna bayar da sabis na Siyarwa na Shawara.

1) Tsarin binciken abokin ciniki:Bayan tattaunawa kan buƙatun gwaji da cikakkun bayanai na fasaha, an ba da shawarar samfuran da suka dace ga abokin ciniki don tabbatarwa. Sannan a faɗi farashin da ya fi dacewa bisa ga buƙatun abokin ciniki.

2) Tsarin keɓancewa na musamman:Zana zane-zane masu alaƙa don tabbatarwa tare da abokin ciniki don buƙatun da aka keɓance. Ba da hotunan nuni don nuna bayyanar samfurin. Sannan, tabbatar da mafita ta ƙarshe kuma tabbatar da farashin ƙarshe tare da abokin ciniki.

3) Tsarin samarwa da isarwa:Za mu samar da injunan bisa ga buƙatun PO da aka tabbatar. Muna ba da hotuna don nuna tsarin samarwa. Bayan kammala samarwa, bayar da hotuna ga abokin ciniki don sake tabbatarwa da injin. Sannan yi naka ma'aunin masana'anta ko daidaitawa na ɓangare na uku (kamar buƙatun abokin ciniki). Duba kuma gwada duk cikakkun bayanai sannan shirya shirya kayan. An tabbatar da isar da samfuran lokacin jigilar kaya kuma sanar da abokin ciniki.

4) Shigarwa da sabis bayan sayarwa:Yana bayyana shigar da waɗannan samfuran a fagen da kuma samar da tallafi bayan tallace-tallace.

Tambayoyin da ake yawan yi:

1. Shin kai mai masana'anta ne? Shin kana bayar da sabis bayan sayarwa? Ta yaya zan iya neman hakan? Kuma yaya game da garantin?Eh, mu ne ƙwararrun masana'antun kamar Muhalli Chambers, kayan gwajin takalman fata, Kayan gwajin roba na roba… a China. Kowace na'ura da aka saya daga masana'antarmu tana da garantin watanni 12 bayan jigilar kaya. Gabaɗaya, muna ba da watanni 12 don gyara KYAUTA. Yayin da muke la'akari da jigilar ruwa, za mu iya tsawaita watanni 2 ga abokan cinikinmu.

Bugu da ƙari, idan na'urarka ba ta aiki, za ka iya aiko mana da imel ko ka kira mu za mu yi iya ƙoƙarinmu don gano matsalar ta hanyar tattaunawarmu ko ta hanyar hira ta bidiyo idan ya cancanta. Da zarar mun tabbatar da matsalar, za a bayar da mafita cikin awanni 24 zuwa 48.

2. Yaya batun lokacin isarwa?Ga injinmu na yau da kullun wanda ke nufin injina na yau da kullun, Idan muna da kaya a cikin ma'ajiyar kayan, yana ɗaukar kwanaki 3-7 na aiki; Idan babu kaya, yawanci, lokacin isarwa shine kwanaki 15-20 na aiki bayan an karɓi kuɗin; Idan kuna cikin gaggawa, za mu yi muku shiri na musamman.

3. Shin kuna karɓar ayyukan keɓancewa? Zan iya samun tambarin na a kan na'urar?Eh, ba shakka. Ba wai kawai za mu iya bayar da injunan da aka saba ba, har ma da injunan da aka keɓance bisa ga buƙatunku. Kuma za mu iya sanya tambarin ku a kan injin, wanda ke nufin muna bayar da sabis na OEM da ODM.

4. Ta yaya zan iya shigar da kuma amfani da injin?Da zarar kun yi odar injinan gwaji daga gare mu, za mu aiko muku da littafin aiki ko bidiyo a sigar Turanci ta Imel. Yawancin injinmu ana jigilar su da cikakken sashi, wanda ke nufin an riga an shigar da shi, kawai kuna buƙatar haɗa kebul ɗin wutar lantarki kuma ku fara amfani da shi.

Rubuta saƙonka a nan ka aika mana da shi