English
  • leqephe_letšoao01

Lihlahisoa

UP-6195 EN 1296 Lab e ka hlophisoang mocheso o ka hlophisoang oa kamore ea mongobo Setšoantšo se hlahelletseng
  • UP-6195 EN 1296 Lab e ka hlophisoang Mocheso oa Mongobo Kamoreng
  • UP-6195 EN 1296 Lab e ka hlophisoang Mocheso oa Mongobo Kamoreng
  • UP-6195 EN 1296 Lab e ka hlophisoang Mocheso oa Mongobo Kamoreng
  • UP-6195 EN 1296 Lab e ka hlophisoang Mocheso oa Mongobo Kamoreng
  • UP-6195 EN 1296 Lab e ka hlophisoang Mocheso oa Mongobo Kamoreng

UP-6195 EN 1296 Lab e ka hlophisoang Mocheso oa Mongobo Kamoreng

Lekala la Mocheso o ka Hlophisoang oa Labke sesebelisoa sa ho etsisa tikoloho se nepahetseng haholo se etselitsoeng ho etsisa maemo a fapaneng a rarahaneng a mocheso le mongobo ka har'a sebaka sa laboratori.

Tšobotsi ea eona ea bohlokoa ke "ho khona ho etsa mananeo," ho lumella basebelisi ho beha esale pele li-setup tse ngata tsa mocheso le mongobo tse nang le linako tse itseng ka molaoli.Kamore e ka etsa diprofaele tse rarahaneng tsa teko ya potoloho ka boiketsetso.

E sebelisoa haholo tlhahlobong ea lipatlisiso le nts'etsopele, taolo ea boleng le tlhahlobo ea ts'epo ea lihlahisoa tse kang likarolo tsa elektroniki, meriana, thepa le likarolo tsa likoloi ho lekola ts'ebetso ea tsona, ho tšoarella le botsitso tlas'a maemo a itseng kapa a fetohang a tikoloho.


Qaqiso ea Sehlahisoa

TŠEBELETSO LE LIPOTSO TSE BOTSOANG KA MOLAO:

Li-tag tsa Sehlahisoa

Tšebeliso:

Sesebelisoa sena se ka etsisa maemo a fapaneng a tikoloho.
E loketse ho leka ts'ebetso ea thepa, joalo ka ho hanela mocheso, ho hanela omileng, ho hanela mongobo le ho hanela serame.
Seo se ka hlalosa tshebetso ya thepa.

Sehatsetsing le Plenum:

1, Plenum e kentsoeng ka morao e nang le coil e pholileng le li-heater tsa terata tsa nichrome
2, Lienjene tse peli tsa ¾ h0p tse nang le li-shaft tsa tšepe e sa hloekang ea karolo e le 'ngoe
3, Sistimi ea sehatsetsi ea cascade e seng ea CFC e sebelisang li-compressor tsa Copeland Discus tse se nang mocheso o feteletseng
4, Mamati a phihlello a tšebeletso a nang le mapheo a nang le li-latch tse notleloang tse ka notleloang

MOLAOLI OA MANANEO:

1. Taolo ea PLC bakeng sa kamore ea liteko

2. Mefuta ea mehato e kenyelletsa: ramp, soak, jump, auto-start, le end

3. Sebopeho sa RS-232 ho hokela khomphutha bakeng sa tlhahiso

Litlhaloso:

Mohlala UP-6195-80L UP-6195-
150L		 UP-6195-
225L		 UP-6195-
408L		 UP-6195-
800L		 UP-6195-
1000L
Boholo ba ka hare: WHD(cm) 40*50*40 50*60*50 60*75*50 60*85*80 100*100*80 100*100*100
Boholo ba kantle: WHD(cm) 105*165*98 105*175*108 115*190*108 135*200*115 155*215*135 155*215*155
Mefuta ea mocheso (Mocheso o tlase:A:+25ºC; B:0ºC;C:-20ºC; D:-40ºC; E:-60ºC; F:-70ºC) (Mocheso o phahameng: + 150ºC)
Sebaka sa mongobo 20%~98% RH
Ho nepahala ha tlhahlobo ea mocheso/
ho tšoana		 0.1ºC/±2.0ºC
Ho Feto-fetoha ha Thempereichara ± 0.5ºC
Ho nepahala ha taolo ea mongobo ± 0.1%;± 2.5%
Mocheso, nako ea ho pholisa Futhumatsa hoo e ka bang 4.0°C/min; Ho pholisa hoo e ka bang 1.0°C/min
Thepa ea ka hare le ea kantle SUS#304 Tšepe e sa ruseng bakeng sa kamore e ka hare; Pente ea nano ea poleiti e batang e tsoetseng pele bakeng sa kantle
Lisebelisoa tsa ho kenya mocheso E hanela mocheso o phahameng, bongata bo phahameng, e lokisa chlorine, thepa ea ho thibela foam ea ethyl acetum
Sistimi ea ho pholisa Komporeitara ea moea e pholisang/e nang le karolo e le 'ngoe (-40°C), komporeitara ea moea le metsi e nang le likarolo tse peli
(-50°C~-70°C)
Lisebelisoa tsa tšireletso Switch ea fuse, switch ea compressor overload, switch ea tšireletso ea khatello e phahameng le e tlase ea sehatsetsing,
sesebelisoa sa tšireletso ea mocheso o feteletseng, fuse, sistimi ea temoso ea ho hloleha ha mongobo o phahameng
Likarolo Fensetere ea ho shebella, lesoba la teko la 50mm, Mabone a ka hare a PL, Gauze ea tleloubu e metsi le e omileng, poleiti ea karohano, castorx4, Foot Cupx4
Konpressor Letšoao la pele la "Tecumseh" la Fora
Molaoli Taiwan, Software e Ikemetseng ea R&D
Matla AC220V 50/60Hz & 1 , AC380V 50/60Hz 3
Boima (kg) 170 220 270 320 450 580
  • E fetileng:
  • E 'ngoe:

    • Tšebeletso ea rona:

    Nakong eohle ea ts'ebetso ea khoebo, re fana ka tšebeletso ea ho rekisa ea boeletsi.

    1) Ts'ebetso ea ho botsa bareki:Ho buisana ka litlhoko tsa liteko le lintlha tsa tekheniki, ho sisintswe lihlahisoa tse loketseng ho moreki ho netefatsa. Ebe o qotsa theko e loketseng ka ho fetisisa ho latela litlhoko tsa moreki.

    2) Litlhaloso li iketsetsa ts'ebetso:Ho taka litšoantšo tse amanang le tsona ho netefatsa le moreki bakeng sa litlhoko tse ikhethileng. Fana ka linepe tsa litšupiso ho bontša ponahalo ea sehlahisoa. Ebe, netefatsa tharollo ea ho qetela 'me u tiise theko ea ho qetela le moreki.

    3) Ts'ebetso ea tlhahiso le phano:Re tla hlahisa mechini ho latela litlhoko tsa PO tse tiisitsoeng. Re fana ka linepe ho bontša ts'ebetso ea tlhahiso. Kamora ho qeta tlhahiso, fa moreki linepe ho netefatsa hape ka mochini. Ebe u etsa tlhahlobo ea fektheri kapa tlhahlobo ea motho oa boraro (joalo ka litlhoko tsa bareki). Hlahloba 'me u leke lintlha tsohle ebe u hlophisa ho paka. Ho tlisa lihlahisoa ho netefalitsoe nako ea ho romella 'me u tsebise moreki.

    4) Tšebeletso ea ho kenya le ea kamora ho rekisa:E hlalosa ho kenya dihlahiswa tseo tshimong le ho fana ka tshehetso ya kamora thekiso.

    LBH:

    1. Na u Moetsi? Na u fana ka tšebeletso ea kamora ho rekisa? Nka kopa seo joang? Hona ho thoe'ng ka waranti?E, re bafepedi ba litsebi joalo ka Likamore tsa Tikoloho, lisebelisoa tsa tlhahlobo ea lieta tsa letlalo, Lisebelisoa tsa tlhahlobo ea rabara ea polasetiki… Chaena. Mochini o mong le o mong o rekiloeng fekthering ea rona o na le waranti ea likhoeli tse 12 kamora ho romelloa. Ka kakaretso, re fana ka likhoeli tse 12 bakeng sa tlhokomelo ea MAHALA. Ha re ntse re nahana ka lipalangoang tsa leoatleng, re ka eketsa likhoeli tse 2 bakeng sa bareki ba rona.

    Ho feta moo, haeba mochini oa hau o sa sebetse, o ka re romella lengolo-tsoibila kapa oa re letsetsa re tla leka ka hohle ho fumana bothata ka moqoqo oa rona kapa ka moqoqo oa video haeba ho hlokahala. Hang ha re se re tiisitse bothata, tharollo e tla fanoa nakong ea lihora tse 24 ho isa ho tse 48.

    2. Ho thoe'ng ka nako ea ho tlisa thepa?Bakeng sa mochini oa rona o tloaelehileng, ho bolelang mechine e tloaelehileng, Haeba re na le thepa ka tlung ea polokelo, ke matsatsi a 3-7 a mosebetsi; Haeba ho se na thepa, hangata, nako ea ho tlisa ke matsatsi a 15-20 a mosebetsi kamora hore tefo e amoheloe; Haeba u hloka thuso ka potlako, re tla u etsetsa tokisetso e khethehileng.

    3. Na o amohela ditshebeletso tsa ho iketsetsa dintho? Na nka ba le letshwao la ka mochining?E, ehlile. Ha re kgone ho fana ka mechine e tloaelehileng feela empa hape re ka fana ka mechine e ikhethileng ho latela ditlhoko tsa hao. Hape re ka beha letshwao la hao mochining ho bolelang hore re fana ka tshebeletso ya OEM le ODM.

    4. Nka kenya le ho sebelisa mochini joang?Hang ha o se o odarile mechini ea liteko ho rona, re tla u romella bukana ea ts'ebetso kapa video ka mofuta oa Senyesemane ka Imeile. Boholo ba mochini oa rona o romelloa ka karolo eohle, ho bolelang hore o se o kentsoe, o hloka feela ho hokela thapo ea motlakase ebe o qala ho e sebelisa.

    Ngola molaetsa oa hau mona 'me u o romelle ho rona

    Lihlopha tsa lihlahisoa

    Tobetsa enter ho batla kapa ESC ho kwala