Lihlahisoa
UP-5035 Foam Indentation Force Deflection Tester
Tlhaloso:
Mochini ona o sebelisetsoa ho lekanya ho thatafala ha concave ea lisebelisoa tsa rekere tse porous.
E ka lekanya lisampole tsa foam ea seponche sa polyurethane le ho etsa liteko tse boletsoeng ho litekanyetso tsa naha, le ho lekanya ka nepo ho thatafala ha liponche, foam le lisebelisoa tse ling.
E ka boela ea sebelisoa ho lekanya boima bo boletsoeng ba ho kenngoa ha foam ea setulo se hlahisitsoeng (joaloka backrest, foam cushion foam, joalo-joalo), le ho lekanya ka nepo boima ba ho indentation ba karolo ka 'ngoe ea foam ea setulo.
Molao-motheo:
Mohlala o behoa pakeng tsa li-platen tse ka holimo le tse ka tlaase, 'me platen e ka holimo e hatella sampole ea boholo bo itseng ho ea tlaase ka lebelo le boletsoeng ho concavity e boletsoeng ke mokhoa oa A (mokhoa oa B le mokhoa oa C) o hlokoang ke maemo a naha.
Ha sele ea mojaro ho eona e khutlisa khatello e utloisitsoeng ho molaoli bakeng sa ho sebetsa le ho bonts'a, ho thatafala ha lintho tse kang seponche le foam ho ka lekanyetsoa.
Likaroloana:
1. Ho tsosolosa ka mokhoa o itekanetseng: Ka mor'a hore k'homphieutha e fumane taelo ea ho qala teko, tsamaiso e tla tsosolosa ka bo eona.
2. Ho khutla ka mokhoa o itekanetseng: Ka mor'a hore sampuli e robehe, e tla khutlela ka ho toba sebakeng sa pele.
3. Ho fetoha ka mokhoa o itekanetseng: Ho ea ka boholo ba mojaro, li-gear tse fapaneng li ka fetoloa ho netefatsa ho nepahala ha tekanyo.
4. Fetola lebelo: Mochine ona o ka fetola lebelo la teko ka mokhoa o ikemetseng ho latela mehlala e fapaneng.
5. Pontšo ea teka-tekano: Sistimi e ka khona ho hlokomela tekanyo e nepahetseng ea matla a matla.
6. Mokhoa oa ho laola: Mekhoa ea liteko e kang matla a teko, lebelo la teko, phalliso le khatello e ka khethoa ho latela litlhoko tsa tlhahlobo.
7. Mochine o le mong bakeng sa merero e mengata: o nang le li-sensor tsa litlhaloso tse fapaneng, mochine o le mong o ka sebelisoa bakeng sa merero e mengata.
8. Curve traversal: Ka mor'a hore tlhahlobo e phethoe, u ka sebelisa mouse ho fumana le ho hlahloba bohlokoa ba matla a ntlha-by-point le data ea deformation ea curve ea teko.
9. Pontšo: Pontšo e matla ea data le ts'ebetso ea tlhahlobo ea curve.
10. Liphetho: Liphetho tsa liteko li ka fihlelleha 'me curve ea data e ka hlahlojoa.
11. Moeli: ka taolo ea lenaneo le moeli oa mochine.
12. Overload: Ha mojaro o feta boleng bo lekantsoeng, o tla emisa ka bohona.
Maemo:
GB/T10807-89;ISO 2439-1980; ISO 3385,JISK6401;ASTM D3574;AS 2282.8 Mokhoa oa Tlhahlobo ea A-IFD.
Litlhaloso:
| Mokhoa oa ho utloa | Qobella sensor ka boiketsetso dispaly |
| Laola Cell Capacity | 200Kg |
| Motor | Sistimi ea taolo ea enjene ea Servo |
| Phetoho ea unit | Kg,N,Lb |
| Ho nepahala | 0.5 grade(±0.5%) |
| Teko ea stroke | 200mm |
| Lebelo la teko | 100±20mm/min |
| Boholo ba sejana sa ho hatella ka holimo | Diameter 200mm |
| Moeli o ka tlase-radius | R1 limilimithara |
| Sethala se tlase | 420mmx420mm |
| Bophara ba lesoba la moea | 6.0 limilimithara |
| Lekhalo la setsi sa lesoba | 20 limilimithara |
| Boholo ba mohlala | (380+10)mmx(380+10)mmx(50±3)mm |
| Boima ba 'mele | 160kg |
| Matla | AC220V |
Lethathamo la litlhophiso:
| Mochini | Patlisiso le nts'etsopele e ikemetseng | 1 likhomphutha |
| the touch screen controller | Patlisiso le nts'etsopele e ikemetseng | 1 likhomphutha |
| Enjene ea servo e nepahetseng haholo | Tamagawa, Japane | 1 likhomphutha |
| kutlo | Phetiso ea Amerika | 1 likhomphutha |
| screw | Taiwan TIB | 1 likhomphutha |
| behang | Japane NSK | 1 likhomphutha |
Tšebeletso ea rona:
Nakong ea ts'ebetso eohle ea khoebo, re fana ka litšebeletso tsa Consultative Selling.
LBH:
Ho feta moo, Haeba mochine oa hau o sa sebetse, o ka re romella e-mail kapa oa re letsetsa re tla leka ka hohle ho fumana bothata ka moqoqo oa rona kapa ka puisano ea video ha ho hlokahala. Ha re se re netefalitse bothata, tharollo e tla fanoa nakong ea lihora tse 24 ho isa ho tse 48.
