Lihlahisoa
Taolo ea Valve ea Katoloso ea Elektroniki ea TEMI2702
Selelekela:
Theknoloji e tsoetseng pele ea taolo ea PID e sebelisoa ho laola ka nepo tekanyo ea ho buloa ha valve ea katoloso ea elektroniki, e fana ka bokhoni bo loketseng ba ho pholisa ho fihlela litlhoko tse fapaneng tsa mocheso le mongobo oa kamore ea teko mabapi le bokhoni ba ho pholisa, e ntlafatsa bokhoni ba lisebelisoa tsa tlhahlobo ea tikoloho ho etsa liteko tsa mocheso le mongobo, haholo-holo li loketse taolo ea tikoloho ea mocheso o tlase le mongobo o tlase. Pontšo e hlakile ebile e utloahala habonolo, e na le kutloisiso e matla ea mahlakore a mararo. Sistimi ea taolo e ka hlophisoang e tenyetseha ebile e bonolo ho e sebetsa, ka ts'ebetso e tsitsitseng, mosebetsi o sebetsang hantle haholoanyane, le mekhoa ea ho kenya e tenyetsehang. E ka kenngoa kantle kapa ea kenngoa.
Matšoao a tekheniki:
Skrine e tšesaane ea 'mala oa 'nete oa lisenthimithara tse 1. 7;
2. Mekhoa e 'meli ea taolo: lenaneo/boleng bo sa fetoheng;
Mofuta oa sensor: li-input tse peli tsa PT100 (input ea sensor ea elektroniki e ikhethileng);
4. Tlhahiso: Voltage pulse (SSR)/Tlhahiso ya taolo: Ditsela tse 2 (mocheso/mongobo)/tsela tse 2 tlhahiso ya analoge ya 4-20mA/tlhahiso ya relay ya ditsela tse 16 (e sa sebetseng)/tlhahiso ya ho ikopanya ya DO:
(1) T1-T8: 8:00
(2) IS ea ho ikopanya le motho ka hare: lintlha tse 8
(3) Letšoao la nako: hora ea bone
(4) Ho matha ha mocheso: ntlha e le 1
(5) Mongobo o Matha: ntlha e le 1
(6) Mocheso HO PHAHAMA: ntlha e le 1
(7) Mocheso o theohile: ntlha e le 1
(8) Mongobo HOlimo: ntlha e le 1
(9) Mongobo o theohile: ntlha e le 1
(10) Ho Kolobisa Mocheso: ntlha e le 1
(11) Mongobo o Kolobisang: ntlha e le 1
(12) Ho ntsha metsi: ntlha e le 1
(13) Phoso: ntlha e le 1
(14) Qetellong ea lenaneo: 1:00
(15) Ref ea 1: Ntlha e le 1
(16) Ref ea 2: Ntlha e le 1
(17) Alamo: lintlha tse 4 (mofuta oa alamo o ikhethileng)
5. Letšoao la taolo: Letšoao la taolo la IS la litsela tse 8/letšoao la taolo la T la litsela tse 8/letšoao la taolo la AL la litsela tse 4;
6. Letšoao la alamo: Lialamo tsa phoso tsa kantle tsa DI tse 16;
7. Mefuta ea tekanyo ea mocheso: - 90.0 ºC - 200.0 ºC, (ha ho hlokahale - 90.0 ºC - 300.0 ºC), phoso ± 0.2 ºC;
8. Mefuta ea tekanyo ea mongobo: 1.0% - 100%, phoso ± 1%;
9. Sebopeho sa puisano: RS232/RS485;
10. Mofuta wa puo ya sebopeho: Sechaena/Senyesemane;
11. E na le mosebetsi oa ho kenya litlhaku tsa Sechaena, ho hlophisa le ho kenya tlhaiso-leseling ea moetsi, lebitso la phoso, lebitso la teko, jj., ka ponts'o e hlakileng le e hlakileng;
12. Liphetho tse ngata tsa ho fetisetsa lipontšo tse kopantsoeng, 'me matšoao a ka feta ts'ebetsong ea logical (Eseng, LE, KAPA, NOR, XOR);
13. Mekhoa ea taolo ea relay e fapaneng: paramethara ->mokhoa oa relay, relay ->mokhoa oa paramethara, mokhoa oa motsoako oa logic, mokhoa oa lets'oao la composite;
14. Ho hlophisa mananeo: Lihlopha tse 120 tsa mananeo li ka hlophisoa, ka likarolo tse ka bang 100 ka sehlopha sa mananeo, lihlopha tsohle li potoloha 'me tse ling li potoloha;
15. Likhutlo: pontsho ea mocheso, mongobo oa PV, likhutlo tsa SV ka nako ea sebele;
16. Ka ts'ebetso ea marang-rang, aterese ea IP e ka beoa, 'me sesebelisoa se ka laoloa hole;
17. E ka tlisa printa (mosebetsi oa USB ha o hlokehe);
18. Phepelo ea motlakase: 85-265V AC, 50/60Hz, Phepelo ea motlakase ea boto ea I/O: DC 24V/600mA.
Litlhaloso:
Tekanyo ka kakaretso: 222 × lekholo le mashome a robeli a metso e robeli × 48 (mm) (bolelele × bophara × botebo)
Boholo ba lesoba la ho kenya: 196 × 178 (mm) bolelele × bophara)
Tšebeletso ea rona:
Nakong eohle ea ts'ebetso ea khoebo, re fana ka tšebeletso ea ho rekisa ea boeletsi.
LBH:
Ho feta moo, haeba mochini oa hau o sa sebetse, o ka re romella lengolo-tsoibila kapa oa re letsetsa re tla leka ka hohle ho fumana bothata ka moqoqo oa rona kapa ka moqoqo oa video haeba ho hlokahala. Hang ha re se re tiisitse bothata, tharollo e tla fanoa nakong ea lihora tse 24 ho isa ho tse 48.
