| Tauira | UP-2000 |
| Momo | Tauira tatau |
| Utaina Mōrahi | 10KN |
| Whakawhiti Wāhanga | Teitei,Kg,g,Kn,Lb; mm,cm,inihi |
| Te Tohu Tika | 0.5% |
| Awhe ine-kaha | 0.4%~100%FS |
| Te Tika o te Ine i te Kaha | ≤0.5% |
| Awhe ine-whakarerekētanga | 2%~100%FS |
| Te Tika o te Ine i te Hurihanga | 1% |
| Taumira Nekehanga Kurupae Whakawhiti | 0.001mm |
| Awhe Tere o te Kurupae Whakawhiti | 0.01~500mm/min |
| Te Tika o te Tere o te Nekehanga | ≤ 0.5% |
| Whānui Whakamātautau | 400mm (kia rite rānei ki te tono) |
| Wāhi Kume | 700mm |
| Wāhi Kōpeketanga | 900mm (kia rite rānei ki te tono) |
| Ngā here | Pupuri Wedge, Āpitihanga Pēhi, Taputapu Piko |
| Pūnaha Rorohiko | He rorohiko waitohu kua rite |
| Te matotoru o te tauira papatahi | 0~7mm |
| Pūtake Hiko | AC220V |
| Ngā Paerewa | ISO 7500-1 ISO 572 ISO 5893 ASTMD638695790 |
| Rahi o te kaihautū | 860*560*2000mm |
| Taumaha | 350Kg |
Ngā Hua
Taputapu Whakamātautau Kume Pehanga
Whakaahuatanga:
Ko te Mīhini Whakamātautau Hiko Ao e whakahaerehia ana e te Rorohiko he tauira mīhini whakamātautau matatau e whakamahi ana i te mana whakahaere porowhita kati rorohiko me te hangarau whakaaturanga whakairoiro. Kei runga i te Mircrosoft Windows te pūmanawa whakahaere, ā, kei a ia te putanga reo Hainamana me te reo Ingarihi. Kei te rorohiko te mana whakahaere i te tukanga whakamātautau katoa; ka taea e te pūmanawa te tiki i te uara whakamātautau mā ngā momo pūoko katoa, ā, mā te whakamahi i te kōwae tātari pūmanawa, ka taea e te kaiwhakamahi te tiki aunoa i ngā momo tawhā miihini katoa pēnei i te kaha kume, te modulus rapa me te ōwehenga roa. Ā, ka taea te tiaki i ngā raraunga whakamātautau me ngā hua katoa ki te rorohiko, ka taea hoki e te pūnaha te tā i te pūrongo whakamātautau me te pihi me te tawhā.
He whānuitia te whakamahinga o te mīhini whakamātautau i roto i te ao o te rapa, te kirihou, te paipa PVC, te papa, te waea whakarewa, te taura, ngā rauemi ātete wai me te umanga kiriata. Mā te whakamahi i ngā momo taputapu rerekē, ka taea te whakamātautau i te kume, te pēhi, te piko, te kutikuti, te tihore, te haehae me ngā momo whakamātautau katoa. He taputapu whakamātautau noa tēnei mō ngā momo taiwhanga katoa me ngā tari whakahaere kounga hei whakatau i te kounga o ngā rauemi me te tātari miihini.
Tawhā hangarau matua:
Whakataki o te pūmanawa UTM:
Pūmanawa Mīhini Whakamātautau Ao Whānui (neke atu i ēnei e whai ake nei)
- He pūmanawa kaha tēnei, tae atu ki ngā kaupapa mō te kume, te pēhi, te piko, te kume, te whakamātautau tihore i ngā mea whakarewa, ngā mea kore-whakarewa, me ētahi atu rauemi.
- I runga i te Windows, he ngawari te whakahaere me te ngawari ki te ako.
- Ka whakawhiti reo i waenga i te reo Hainamana Ngāwari, te reo Hainamana Tuku Iho me te reo Ingarihi.
- Ka taea te waihanga i ngā pūkete kaiwhakamahi me ngā kupuhipa tekau.
- Kei a ia te mahi tiaki o te taumaha rawa: ka taea te whakarite i te uara taumaha rawa e te kaiwhakamahi.
- Ka taea te whakawhiti ngāwari i ngā waeine o te kaha, o te nekehanga rānei. Ka whakaaturia ngā panonitanga o te ahotea me te taumahatanga i te wā tūturu.
- Ka taea te whakawhiti i ngā kōpiko i ngā wā katoa, pērā i te nekehanga-kawenga, te wā-kawenga, te wā-nekehanga, te ahotea-taumahatanga, te roa o te kawenga-kume.
- Pūnaha whakatikatika-rua uara kaha: te tautuhinga aunoa me te kore, te tautuhi aunoa me te kawemai i ngā raraunga whakatikatika.
- He pai mō ngā paerewa whakamātautau maha, pērā i te ISO, JIS, ASTM, DIN, GB me ētahi atu.
- Whakatauritea ngā pihi whakamātautau i roto i te rōpū kotahi mā te puranga i a rātou.
Tautuhinga kore aunoa. Ka tatauhia aunoatia te kaha mōrahi, te kaha hua-runga, te kaha hua-iti, te kaha ārai-pēhanga kaha-ātete-kume, te tauwehenga ngāwari, te ōrau o te roa, me ētahi atu.
Tā mātou ratonga:
I roto i te tukanga pakihi katoa, ka tukuna e mātou he ratonga Hoko Tohutohu.
1) Te tukanga uiui a te kiritaki:I te matapaki i ngā whakaritenga whakamātautau me ngā taipitopito hangarau, ka tūtohu i ngā hua e tika ana ki te kiritaki hei whakaū. Kātahi ka whakahua i te utu e tika ana kia rite ki ngā hiahia o te kiritaki.
2) Ngā whakaritenga whakarite tukanga:Te tuhi i ngā tuhi e pā ana hei whakaū ki te kiritaki mō ngā whakaritenga ritenga. Tukuna he whakaahua tohutoro hei whakaatu i te āhua o te hua. Kātahi, whakaū i te otinga whakamutunga, me te whakaū i te utu whakamutunga ki te kiritaki.
3) Te tukanga whakaputa me te tuku:Ka hangaia e mātou ngā mīhini kia rite ki ngā whakaritenga PO kua whakamanahia. Ka tukuna atu he whakaahua hei whakaatu i te tukanga whakaputa. Kia oti te whakaputa, ka tukuna atu he whakaahua ki te kiritaki hei whakaū anō mā te mīhini. Kātahi ka whakatikatikahia e tō ake wheketere, e te tuatoru rānei (e ai ki ngā whakaritenga a te kiritaki). Tirohia me te whakamātautau i ngā taipitopito katoa, kātahi ka whakarite i te tākai. Tukuna ngā hua kua whakamanahia te wā tuku me te whakamōhio atu ki te kiritaki.
4) Tāutanga me te ratonga i muri i te hoko:E tautuhi ana i te tāutanga o aua hua ki te parae me te whakarato tautoko i muri i te hoko.
Ngā Pātai Auau:
1. He Kaihanga koe? Kei te tuku ratonga muri-hoko koe? Me pēhea taku tono atu mō tēnā? Ā, me pēhea te pūtāhui?Āe, ko mātou tētahi o ngā Kaihanga ngaio pērā i ngā Rūma Taiao, ngā taputapu whakamātautau hū hiako, ngā taputapu whakamātautau rapa kirihou… i Haina. Ko ia mīhini i hokona mai i tā mātou wheketere he 12 marama te whakamana i muri i te tuku. I te nuinga o te wā, ka tukuna e mātou he 12 marama mō te tiaki KOREUTU. Ahakoa e whakaarohia ana te kawe moana, ka taea e mātou te whakaroa i te 2 marama mō ā mātou kiritaki.
Hei tāpiri atu, ki te kore tō mīhini e mahi, ka taea e koe te tuku īmēra mai, te waea mai rānei ki a mātou. Ka whakapau kaha mātou ki te kimi i te raruraru mā te kōrerorero, mā te kōrerorero ataata rānei mēnā e tika ana. Kia whakaūtia te raruraru, ka tukuna te otinga i roto i ngā haora 24 ki te 48.
2. Ā, me pēhea te wā tuku?Mō tā mātou mīhini paerewa, arā, ko ngā mīhini noa, ki te mea he taonga kei roto i te whare putunga, e 3-7 ngā rā mahi; ki te kore he taonga, ko te tikanga, ko te wā tuku he 15-20 ngā rā mahi i muri i te whiwhinga o te utu; ki te mea kei te hiahia nui koe, ka whakaritea e mātou he whakaritenga motuhake māu.
3. E whakaaetia ana e koe ngā ratonga whakaritenga? Ka taea e au te tāpiri i taku waitohu ki te mīhini?Āe, koia rā. Ehara i te mea ko ngā mīhini paerewa anake ka taea e mātou te tuku engari ko ngā mīhini ritenga anō hoki kia rite ki ō hiahia. Ā, ka taea hoki e mātou te tāpiri i tō waitohu ki te mīhini, ko te tikanga ka tukuna e mātou he ratonga OEM me ODM.
4. Me pēhea taku tāuta me taku whakamahi i te mīhini?Kia oti i a koe te tono i ngā mīhini whakamātautau mai i a mātou, ka tukuna atu e mātou te pukapuka whakahaere, te ataata rānei i te putanga Ingarihi mā te Īmēra. Ko te nuinga o tā mātou mīhini ka tukuna me te wāhanga katoa, ko te tikanga kua tāuta kētia, me hono noa e koe te taura hiko ka tīmata ki te whakamahi.
Tuhia tō karere ki konei ka tuku mai ki a mātou
