Viscometer na Juyawa Mai šaukuwa na Dijital

Ana amfani da viscometer sosai shuke-shuke da cibiyoyin bincike na kimiyya na mai, mai, fenti mai, kayan shafa, ɓangaren litattafan almara, yadi, abinci, magani, wakili na m da kayan shafawa, da sauransu.

Abokan ciniki ke zaɓar kayan aikin a cikin kowane ciniki saboda fa'idarsa a cikin ma'auni daidai, sauri, kai tsaye da sauƙi.

Aika mana imel

Cikakken Bayani

HIDIMAR DA FAQ:

Tags samfurin

Babban fasali:

1. Yana ɗaukar fasahar ARM, ginanniyar tsarin Linux. Ayyukan aiki yana da sauƙi kuma bayyananne, ta hanyar ƙirƙirar hanyoyin gwaji da bincike na bayanai, gwaji mai sauri da dacewa;

2. Daidaitaccen ma'aunin danko: kowane kewayon ma'auni ana daidaita shi ta atomatik ta kwamfuta tare da babban daidaici da ƙaramin kuskure;

3. Nuni mai arziki: ban da danko (danko mai tsauri da danko mai kinematic), akwai zafin jiki, ƙimar ƙarfi, damuwa mai ƙarfi, ƙimar ƙima a matsayin adadin ƙimar cikakken kewayon (nuni mai hoto), ƙararrawa ambaton ƙararrawa, dubawa ta atomatik, matsakaicin ma'auni a ƙarƙashin haɗin saurin juyi na yanzu, kwanan wata, lokaci, da sauransu. Za a iya nuna ma'aunin kinematic na ma'aunin ma'auni na masu amfani daban-daban don saduwa da ma'auni daban-daban.

4. Cikakken aiki: na iya zama ma'auni na lokaci, gina kansa 30 ƙungiyoyi na hanyoyin gwaji, samun dama ga ƙungiyoyin 30 na bayanan ma'auni, nunin danko na ainihi na lokaci-lokaci, bayanan da aka buga, masu lankwasa, da dai sauransu;

5. Ka'idojin saurin da ba ta da mataki:
RV1T jerin: 0.3-100 rpm, jimlar 998 juyawa gudu
RV2T jerin: 0.1-200 rpm, 2000 rpm

6. Nuna lankwasa na shear kudi zuwa danko: zai iya saita kewayon juzu'i, nuni na ainihi akan kwamfutar; Hakanan zai iya nuna lanƙwan lokacin zuwa danko.

7. Operating System cikin Ingilishi da Sinanci.

Ana iya aunawa a cikin babban kewayo daga 50 zuwa miliyan 80 MPA.S, samfuran da za su iya saduwa da manyan zafin jiki daban-daban na narkewa (misali narke mai zafi, kwalta, robobi, da sauransu)

Adaftar danko mara nauyi (rotor 0) na zaɓi kuma yana iya auna dankon paraffin wax, kakin polyethylene idan samfurin narkar da shi.

Cikakken sigogin fasaha:

Model	Saukewa: RVDV-1T-H	HADV-1T-H	HBDV-1T-H
Sarrafa / Nuni	5-inch launi tabawa
gudun(r/min)	0.3 - 100, Gudun mara iyaka, ana samun saurin gudu 998
kewayon aunawa (mPa.s)	6.4 - 3.3M Rotor No.0: 6.4-1K Rotor No.21: 50-100K Rotor No.27:250-500K Rotor No.28:500-1M Rotor No.29:1K-2M	12.8 - 6.6M Rotor No.0:12.8-1K Rotor No.21: 100-200K Rotor No.27:500-1M Rotor No.28:1K-2M Rotor No.29:2K-4M	51.2 - 26.6M Rotor No.0: 51.2-2K Rotor No.21:400-1.3M Rotor No.27:2K-6.7M Rotor No.28:4K-13.3M Rotor No.29:8K-26.6M
Rotor	21,27,28,29 (Standard) No.0 (Na zaɓi)
Misalin sashi	Rotor No.0:21ml Rotor No.21: 7.8ml Rotor No.27: 11.3ml Rotor No.28: 12.6ml Rotor No.29: 11.5ml

Na baya: UP-6019 LCD Touch Screen Rotary Viscometer

Na gaba: UP-6020 Fentin Fim ɗin Gwajin Mannewa

Ayyukanmu:

Yayin duk tsarin kasuwanci, muna ba da sabis na Siyar da Shawarwari.

1) Tsarin binciken abokin ciniki:Tattaunawa game da buƙatun gwaji da cikakkun bayanan fasaha, samfuran samfuran da aka ba da shawarar ga abokin ciniki don tabbatarwa. Sannan faɗi mafi dacewa farashin bisa ga bukatun abokin ciniki.

2) Ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun tsari:Zana zane masu alaƙa don tabbatarwa tare da abokin ciniki don buƙatun na musamman. Bayar da hotunan tunani don nuna bayyanar samfurin. Bayan haka, tabbatar da mafita na ƙarshe kuma tabbatar da farashin ƙarshe tare da abokin ciniki.

3) Tsarin samarwa da bayarwa:Za mu samar da inji bisa ga tabbatar da bukatun PO. Bayar da hotuna don nuna tsarin samarwa. Bayan kammala samarwa, ba da hotuna ga abokin ciniki don sake tabbatarwa tare da injin. Sa'an nan yi nasu masana'anta calibration ko wani ɓangare na uku calibration (kamar yadda abokin ciniki bukatun). Bincika kuma gwada duk cikakkun bayanai sannan shirya shirya kaya. Isar da samfuran an tabbatar da lokacin jigilar kaya kuma sanar da abokin ciniki.

4) Shigarwa da sabis na siyarwa:Yana bayyana shigar da waɗannan samfuran a cikin filin da bayar da tallafin tallace-tallace.

FAQ:

1. Shin kai Manufacturer ne? Kuna bayar da sabis na bayan-tallace-tallace? Ta yaya zan iya neman hakan? Kuma yaya game da garanti?Ee, mu ne ɗaya daga cikin ƙwararrun masana'antun kamar ɗakunan muhalli, kayan gwajin takalmin fata, Kayan gwajin roba na filastik… a China. Kowane injin da aka saya daga masana'anta yana da garantin watanni 12 bayan jigilar kaya. Gabaɗaya, muna ba da watanni 12 don kulawa da KYAUTA. yayin la'akari da sufuri na teku, za mu iya tsawaita watanni 2 don abokan cinikinmu.

Bugu da ƙari, idan na'urar ku ba ta aiki, za ku iya aiko mana da imel ko ku kira mu za mu yi iya ƙoƙarinmu don gano matsalar ta hanyar tattaunawa ko ta hanyar bidiyo idan ya cancanta. Da zarar mun tabbatar da matsalar, za a ba da maganin a cikin sa'o'i 24 zuwa 48.

2. Menene game da lokacin bayarwa?Don daidaitaccen injin mu wanda ke nufin inji na yau da kullun, Idan muna da haja a cikin sito, kwanakin aiki ne 3-7; Idan babu hannun jari, yawanci, lokacin isarwa shine kwanaki 15-20 na aiki bayan an karɓi biya; Idan kuna buƙatar gaggawa, za mu yi muku tsari na musamman.

3. Kuna karɓar sabis na keɓancewa? Zan iya samun tambari na akan injin?Eh mana. Ba za mu iya ba kawai injuna daidai ba amma har ma da injunan da aka keɓance bisa ga buƙatun ku. Kuma muna iya sanya tambarin ku akan injin wanda ke nufin muna ba da sabis na OEM da ODM.

4. Ta yaya zan iya shigarwa da amfani da injin?Da zarar ka ba da umarnin injinan gwaji daga wurinmu, za mu aiko maka da littafin aiki ko bidiyo a cikin Turanci ta hanyar Imel. Yawancin injin ɗinmu ana jigilar su tare da ɓangaren gabaɗaya, wanda ke nufin an riga an shigar dashi, kawai kuna buƙatar haɗa kebul na wutar lantarki kuma fara amfani da shi.

Ku rubuta sakonku anan ku aiko mana